hay guys and gals i need some good loads for the 40sw not hot just accurate
ones ihave 140 cast slugs the powder i have are bulleye ,231 clays, unique
reddot ,7625 ,wsf so if anybody has some good plinking loads let me know
testhop
hay guys and gals i need some good loads for the 40sw not hot just accurate
ones ihave 140 cast slugs the powder i have are bulleye ,231 clays, unique
reddot ,7625 ,wsf so if anybody has some good plinking loads let me know
testhop
Unique: 5.7-6.9 This is the mild-to-midrange for this powder. All functioned well in my Glock 23.
"Stand your ground.
Do not fire unless fired upon.
But if they mean to have a war let it begin here."
- Capt. Parker, Lexington Militia, April 19, 1775
You didn't mention Titegroup powder but here is a .40cal load I use to make minor in IPSC. 2.8 gr under a 175 gr Lyman cast truncated cone boolit. Very soft shooting. should make a great plinker round.
Take Care
Bob
Bob
If you are reading this, thank a teacher; if you are reading this in English thank a veteran.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |