Light for caliber 7.62x25 ?????

[NavahoJoe]

I did some trading and wound up with a 7.62x25 semi auto pistol and one box of Speer Gold Dots, Hollow points, .312 Dia., 60 grain. I need loading data for these bullets. My references don't show anything that light. I have Unique, Bulls Eye, Tight Group, Universal Clays, and Trail Boss powder on hand. Anyone have any experience with this caliber, this light?
regards,
NavahoJoe

[runfiverun]

if you have data for a heavier bullet like 100 or so you can try that first.
is 312 the proper diameter for this pistol??

[NavahoJoe]

Mine is a CZ52, same as test firearm used in Lyman" Pistol and Revolver", 2nd edition., groove dia. .310. It recommends a #313249 mold. 85 grns.. Lightest boolit for this caliber, reason for my question about 60 grn. Gold Dots.
Thanks,
NavahoJoe

[kg42]

http://makarov.com/cz52/ has data from 71gr up!!

Contrary to popular belief, these guns have a thin spot in the chamber and are not indestructible.

http://www.harringtonproducts.com/

http://gunsworld.com/cz/52_us.html

http://czechpistols82792.yuku.com/ (old forum)
http://www.czforumsite.info/
(they both have an ammo section)

kg

[Dakoma]

Howdy!About 4 years ago I bought 400 rds. of Starline brass and 400 rds. of Hornaday 90grain XTP .309 diameter all load data that I have seen deals with the .309 bullets,is this corect?.310 cast bullets would be corect

[Bullshop Junior]

I would not thoot then bullets out of that pistol. My CZ 52 will not chamber more then a 310 CAST bullet. I have shot .308 bullets out of mine. It has a rather fast twist so I have used bullets intended for the 30 carb.
BIC/Daniel/BS Jr.