Results 1 to 3 of 3

Thread: Needing imput

  1. #1
    GunLoad Trainee
    Join Date
    Mar 2016
    Posts
    1

    Default Needing imput

    I'm needing some imput on a STEEL load i'm wanting to start reloading but can't find the right powder. The load is for a 12 gauge. It calls For these components Remington 3" hulls,38.5 grains of steel powder,fed209A primer,B.P. TPS wad,a 20 gauge undershot fiber wad. The velocity is about 1590. I'd like to change out the powder since i cant get it up here in MT and keep the velocity close to this load as possible. I have all the other components needed for this load.THANKS for any help on this.

  2. #2
    scat master Clayt's Avatar
    Join Date
    Feb 2014
    Location
    Itchybutt, New Hampsha
    Posts
    238

    Default

    I absolutely do not recommend using load data directly from a internet forum as a singular source!

    You'll really have to do more research from all the powder companies.
    They have the proper equipment and testing facilities to come up with a load that is safe.

    It is possible to blow up a gun and injure yourself by the substitution of a single component in a high pressure shot-shell load.
    ~Clayt

    hunter at large

  3. #3
    Dogs Like Him versifier's Avatar
    Join Date
    Dec 2005
    Location
    New Hampshire
    Posts
    1,854

    Default

    Moved this one to the appropriate spot.....

    You can never be too careful, but I do not know enough about loading shotshells to give any pertinent advice. I like to have three sources whenever possible for loading anything else though, and I can't see it would be any different here. Fortunately we do have some shotshell reloaders here, and I expect we'll be hearing some good ideas. I could stand to learn more about it myself. What say?
    "Stand your ground.
    Do not fire unless fired upon.
    But if they mean to have a war let it begin here."
    - Capt. Parker, Lexington Militia, April 19, 1775

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links