Results 1 to 4 of 4

Thread: Favourite loads for 30-06 (Cast and Commercial Bullets)

  1. #1
    Buff Canuck44's Avatar
    Join Date
    Feb 2006
    Location
    Terrace, B.C. Canada
    Posts
    106

    Default Favourite loads for 30-06 (Cast and Commercial Bullets)

    Well just to start this off, my Huquevarna Husky seems to like my Lyman 311291 cast bullet using water quenched wheelweights over 20 grains of 2400. I am getting 1775 fps using this load and at 100 yards <1" groups are the norm.

    Take Care Eh

    Bob

  2. #2
    GunLoad Trainee
    Join Date
    Mar 2005
    Location
    Wayastern Montana
    Posts
    23

    Default

    311466 FWFL lube 16 gr 2400
    Front sight and squeeze

  3. #3
    GunLoad Trainee
    Join Date
    Oct 2006
    Posts
    5

    Default

    Man, less than one inch at 100 yards is a great load. Don't change a thing. Anytime you can get groups like that at 100 on a regular basis you best leave everything as it.

    D

  4. #4
    Private Baldy's Avatar
    Join Date
    Jun 2006
    Location
    Port St.John, Florida
    Posts
    89

    Default

    I agree with Dew 100% on leaving it alone. That's a good combo there Bob. Good luck with it.
    " Free Men" do not ask permission to bear arms.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links