Page 2 of 2 FirstFirst 12
Results 11 to 18 of 18

Thread: Toying with a New wild cat

  1. #11
    Gunload Grunt kg42's Avatar
    Join Date
    Nov 2005
    Location
    BC
    Posts
    510

    Default

    Dave, have you tried reboring? Is it as good as a barrel made from scratch...?

    kg
    Last edited by kg42; 04-15-2006 at 08:38 PM.

  2. #12
    Great Master d-o-k's Avatar
    Join Date
    Aug 2005
    Location
    Flinders Ranges South Australia
    Posts
    500

    Default

    Over the Years I have achived Nortriety with the number of Barrels that I have had rebored to get two lives out of one Barrel ! From .310 Cadets rebored to 357 to a .308 out to 358 (I have a habit of using medium weight barrels for this purpose ) I stumbled across this methord by accident years ago when I had brought a 8x57 & had to get it rebarreled Hector at Sprinters rang me & asked that I come to his shop as soon a I got the chance as there was something he wanted to show me ( after checking with all & sundry that I wasn't going to get Yelled at or beaten for some insult towards him ! ) I turned up to be shown that the underside of the Barrel had a matching set of Proof marks From the Factory! Except the origianal markings claimed my rifle had started it's life as a 7x57 ! I found & find no noticeable loss of accuracy by doing this with in reason.

    Dave
    All times wasted wot not spent shootin

  3. #13
    Dogs Like Him versifier's Avatar
    Join Date
    Dec 2005
    Location
    New Hampshire
    Posts
    1,854

    Default

    Dave, that's a really good deal.
    In my own experience, the effectiveness of a reboring job depends on several factors. There are two different objectives in reboring. One creates a larger bore barrel that is then (hopefully) reamed and rifled, the other involves relining.
    A reboring bit is a long, piloted, fluted bit that can be operated two ways, chucked in a drill with the bit rotating, or with the barrel in a lathe rotating and the bit stationary (either in the tailstock or in a block like I was taught to use a chambering reamer). The pilot is supposed to keep the new bore concentric with the old bore, and usually does, but some runout can and does occur, more with the hand drilling method than with the lathe. If the lathe operator has some experience in knowing how often to pull the bit, clean the flutes, and reoil, the results can be impressive.
    If the barrel is to be relined, it is thoroughly cleaned and degreased at this point, and the bore size double checked. If all is well, the new liner is soldered into place, and the barrel recrowned, rechambered, and refitted in the action. This isn't a really difficult job and is a common solution to get an antique firearm with a shot-out barrel back into action without altering its chambering, markings, or outward appearance.
    If it is to be reborn in a larger bore and new chambering, the barrel is measured and inspected. If it looks good, subsequent reaming(s) can then proceed easily and effectively to bring the bore to a uniform and correct diameter. It can then be rifled by any of several conventional and/or antiquated methods. Finally, it's chambered for the new cartridge, headspaced, etc., and refitted. Any feeding issues are found and corrected.
    A decent lathe makes the job easier in many ways, most importantly alignment and the self-centering nature of a turning workpiece vs. the turning tool bit. Bubba with a hand drill can make a godawful mess out of a barrel in short order by trying to force the bit at a faster feed rate than it wants to go, by not stopping, cleaning, and reoiling often enough (chips catch under the flutes and chew deep grooves in the bore ), not feeding the bit straight and causing excessive runout (I saw a 24" barrel that some idiot had redrilled right through the side at about 16" ). On the other hand, an experienced machinist/gunsmith can get acceptable results with a hand drill by proceeding slowly and carefully. There will probably be more runout than with a lathe, but there is often more runout in factory barrels than you would believe, and they can be made to shoot well as long as they are properly indexed and carefully crowned with a piloted crowning tool.
    It's getting harder and harder to find decent gunsmiths, at least around here, as it's become pretty much a profitless labor of love. Most of the work seems to be drilling and tapping holes for scope mounts or reciever sights and installing the occasional recoil pad. Small town gunsmiths are rapidly going the same way as mom and pop gun stores. There are a few trying to work the trade who know just enough to be dangerous, so ask for references and check them out before committing heirlooms and cash.
    Last edited by versifier; 04-16-2006 at 03:44 PM.
    "Stand your ground.
    Do not fire unless fired upon.
    But if they mean to have a war let it begin here."
    - Capt. Parker, Lexington Militia, April 19, 1775

  4. #14
    Great Master d-o-k's Avatar
    Join Date
    Aug 2005
    Location
    Flinders Ranges South Australia
    Posts
    500

    Default

    Having sat quietly & watched the boy's at sprinters Re cutting a barrel ! It seems to me that it is truley a labour of love at the very least ! I have seen barrels resleeved but have never gone this way myself ! I had a custom .22 built years ago that has a stainless barrel of abut 3/8 of a inch that was inserted into a 3/4 inch light alloy barrel (the object of the exersize was to have a light weight rifle with the added barrel damping of a medium weight barrel ) The Gun smith who built it (Mev Naughton ) passed away shortly after & his company Fieldman folded ! We have the same problem over here these days many of the Old smiths have retired & there are quite a few of the Backyarders springing up ! Most of whom I would'nt trust to repair a Kid's cap gun let alone a real firearm !

    Dave
    All times wasted wot not spent shootin

  5. #15
    GunLoad Trainee
    Join Date
    Apr 2006
    Posts
    2

    Default

    G'day d o k, Versifer & kg42,
    I have been reading this thread with interest as last year I received what was left of a bush gunsmith/trinkerer's equipment from his son in law. It is can be observed in his work the amount of "make do" with what he had available. Most of his efforts were based around the Martini Cadet action as the were several barrels for calibres such as .22/310, .256 magnum, .410/303 shotgun and several unknown cartridges.
    Included in the equipment I obtained were several case forming dies, some of which may be for the aforementioned calibres, others for wildcat cartridges he may have been planning for in the future. There is one barrel I will need to chamber cast to find out what it is based on and form of case. The barrell is a No1 Mk3* barrel, shortened and rechambered for a cartridge somewhere between the .357" Mag and the .44" Mag, possibly .41 necked to .303" on a .310 Martini action.

    When checking through the case form dies I located the one I thought was the correct die for this calibre, lubed a .44mag case and pushed it in and out came the result in the picture, .30/44 mag next to a .221 Rem Fireball.
    Luckily, several samples of the .22/310 Cadet survived and came with the gear. I can try and find where I have placed mine and post some photos.

    The case in the photo would be interesting to try as a cast bullet cartridge as loading at 100% would see velocities within the range of cast projectiles.

    John.

  6. #16
    Great Master d-o-k's Avatar
    Join Date
    Aug 2005
    Location
    Flinders Ranges South Australia
    Posts
    500

    Default

    G'Day John
    That 30-44 is one damned interesting round I must say ! I heard many years ago of a chap who had got a 44 down to .22 but never put much faith in it (Old cry of I think the chap in question was handleing the truth a little carelessly) as for the 22-310 I've seen a couple of these over the years made by avid wild cater's ! The closest I ever came was forming my own 22-303 wasps which were a 1 1/4 inch case ! I mght add they caused many a nervious breakdown ! I will watch with intrest for any load development you do with the 30-44 as I would'nt mind playing with something along those lines myself !

    Dave
    All times wasted wot not spent shootin

  7. #17
    Dogs Like Him versifier's Avatar
    Join Date
    Dec 2005
    Location
    New Hampshire
    Posts
    1,854

    Default

    I'm into all things .30cal, especially the little guys. That one looks to be made for cast boolits. All data provided will be hungrily consumed.
    "Stand your ground.
    Do not fire unless fired upon.
    But if they mean to have a war let it begin here."
    - Capt. Parker, Lexington Militia, April 19, 1775

  8. #18
    GunLoad Trainee
    Join Date
    Dec 2005
    Posts
    14

    Default

    I've been working with something very close to what your're asking about. It's the 6x223; or 6mmx45mm. With a 22 inch barrel I can get 3000fps to 3100fps using 70gr bullets. I have pushed it past that; but pressure's are a little too much in my rifle. I wanted a walk about Coyote rifle with a little more power than my 223. It's a good idea for a fun hunting rifle of smaller game.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links