Results 1 to 9 of 9

Thread: Titegroup for the 9MM

  1. #1
    Buff Canuck44's Avatar
    Join Date
    Feb 2006
    Location
    Terrace, B.C. Canada
    Posts
    106

    Default Titegroup for the 9MM

    Developing some loads for the 9MM usiing Titegroup. Tried 4.4 and 4.3 gr under 125 gr Lyman 356402. Loads are a little warmer than I need out of my CZ and Hi-Power. Anyone gone lower with good results?

    Take Care

    Bob

  2. #2
    Moderator Toney's Avatar
    Join Date
    Aug 2005
    Location
    Stillwater Oklahoma
    Posts
    585

    Default

    Hey Bob I've just tryed TG in my 9, it's not to bad. I'm shooting 4.8gr with 115gr bullets. They are a lot differnt than my power pistol loads!!!
    Toney Relic Hunter

  3. #3
    Moderator Toney's Avatar
    Join Date
    Aug 2005
    Location
    Stillwater Oklahoma
    Posts
    585

    Default

    Hey Bob I've just tryed TG in my 9, it's not to bad. I'm shooting 4.8gr with 115gr bullets. They are a lot differnt than my power pistol loads!!!
    Toney Relic Hunter

  4. #4
    Gunload Grunt kg42's Avatar
    Join Date
    Nov 2005
    Location
    BC
    Posts
    510

    Default

    3.5gr with LEE's 125RN, unsized and tumble lubed; that's much more barrel contact than the Lyman I think... works fine in a buddy's Commander and a medium Llama.
    The load is mild and accurate; I didn't go further with that powder.

    kg

  5. #5
    Buff Canuck44's Avatar
    Join Date
    Feb 2006
    Location
    Terrace, B.C. Canada
    Posts
    106

    Default

    Went down to 3.6 gr with Saeco 125 gr boolits and got an avg Dev of 9 and avg vel. of 1,099 fps out of my CZ 85. Like the load, just makes PF for IPSC but very clean burning. Will try it with my STI Trojan with 5" barrel. CZ extractor on the fritz.

    Take Care

  6. #6
    Gunload Grunt kg42's Avatar
    Join Date
    Nov 2005
    Location
    BC
    Posts
    510

    Default

    Wow, that's faster than I thought! Do you lubrisize or tumble lube? I wonder about the difference it would make...

    How fast did they go with 4.4gr?

    kg

  7. #7
    Buff Canuck44's Avatar
    Join Date
    Feb 2006
    Location
    Terrace, B.C. Canada
    Posts
    106

    Default

    I lube size, I would not think it would make much difference. Send me a PM and we can exchange emails. I can send you my Spreadsheet I use to record my chronoed loads.

    Take Care

  8. #8
    Great Master
    Join Date
    May 2021
    Location
    Situs Aosbobet Online
    Posts
    2,234

    Default Peringkat Teratas Agen Idn Poker Halaman

    Untuk orang bertanya tentang agen poker qq login, situs idn poker bonus new member terbesar 2020, poker online idn deposit pulsa, Saya sangat menyarankan ini peringkat tertinggi poker online link or poker online free no download, agen poker idn, idn poker terpercaya dan terbaik, poker online tournaments, poker idn deposit pulsa 10000, dan juga ini luar biasa agen idn poker halaman dan juga ini judi poker online terpercaya, online poker games in india, promo poker idn terbaru, link judi poker terbaik, poker online with friends real money, bersama semua ini berguna poker idn toko which is also great. Also have a look at this luar biasa judi poker idn url dan juga ini agen poker idn bonus new member, situs idn poker deposit pulsa 5000, agen poker 303 online, online poker with friends website, online poker tournaments australia, di atas ini terbaik judi poker idn forum bersama semua ini agen judi poker online terbaik, daftar situs idn poker terbaik, situs idn poker deposit pulsa, online poker tournaments strategy, poker online with friends unblocked, dan juga ini berguna poker idn situs yang juga layak untuk dilihat. Saya juga menyarankan ini baru judi poker toko di atas ini poker online sites for us players, judi poker uang dollar asli, idn poker 88 login, judi online malaysia ditangkap, online poker tips from the pros, dan juga ini luar biasa judi poker idn toko belum lagi ini judi online24jam deposit pulsa xl, poker online real money usa, aplikasi judi poker 88, poker rules for dummies, judi poker pkv, dan juga ini peringkat teratas idn poker situs yang juga hebat. Akhirnya, lihat ini luar biasa agen poker domain and poker idn terbaru bonus new member, idn poker 88 download, online poker games to play with friends, untuk memastikan ekstra. Lihat lainnya Membantu Poker Pkv Games Blog cd7_d80

  9. #9
    Great Master
    Join Date
    May 2021
    Location
    Situs Aosbobet Online
    Posts
    2,234

    Default ISO Standardization Is A Key To The Growth Of Your Company

    Part 2 Part 2: Safety And Performance Specifications For Medical Electrical Equipment En 60601-2-3:2015
    Short wave therapy is very popular in the medical field. That is why importance of regulation dramatically arose. IEC 60601-2-3:2012 specifies the requirements for the safety of the fundamentals and essential performance of short-wave therapy equipment. The definition of short-wave therapy equipment is medical equipment that permits patients to be treated by magnetic or electric fields at the frequency range of more than 13 MHz, but not exceeding 45 MHz. We recommend you reach out to Iteh for more information about the specifics of this document. Check out the top rated iso catalog standards iso-prf-tr-24291 information.

    Innovation Management Tools For Partnership In Innovation Guidance Iso 56003:2019 En Iso 56003:2021
    The creation of the right partnerships is key to the creation and support of new products. This facilitates the exchange of ideas, advice as well as financial and other assistance in addition to other aspects necessary for the creation of a system. EN ISO 56003-2021 is an international standard which provides recommendations on how to create the most efficient partnerships.This document provides a guidance for innovation partnerships. This document provides guidelines for innovation partnerships. It includes the framework for innovation partnership (see Clause 4 through Clause and the examples of tools (see Annexe A to Annex E).Make a decision about whether or not you'd like to join an partnership for innovation. Find, evaluate and choose your partnersAssure that the partners share similar views of the importance of their work and the challenges they face.Manage the interactions with partnersThe guidelines contained in this document apply to all types of collaborations or partnerships. They are able to be utilized by any organization regardless of size, the type of product or service offered, and any type.A) Start-ups that collaborate with larger corporationsB) SME or larger organisations;c. Private sector companies that are public or academic entitiesD. Academic, public, or not-for profit organizations.Begin with a gap analysis, then engage and identify potential innovation partners, and then, manage their interactions.This is applicable to both novice and large businesses. Since partnership is essential for the success of scaling and development this is an issue that applies to every case. Therefore, if your organization is aimed towards long-term growth We suggest that you definitely pay attention to this document. See the best sist catalog standards sist-iso-6707-1-2021 site.

    Characterization And Calculation Of Bulk Materials EN 17289-2:2020
    The various parts of the same standard may be combined or used to regulate entirely separate regions. EN 17178-2, 2020 is the second part of the earlier standard.This document explains how you can calculate the size-weighted fine portion (SWFF) and the size-weighted small portion of crystallized silicona (SWFFCS). The document also specifies the preconditions and assumptions that must be met in order for this method to be considered valid.This document is meant to aid users in evaluating bulk materials in terms of their size-weighted fine fraction or crystalline silica.Annexe A includes an exact procedure to evaluate the SWFFs of bulk materials diatomaceous. Annexe A offers a particular method to evaluate the SWFF for diatomaceous earth bulk materials.This document applies to crystallized silica with bulk material that has been rigorously studied and validated for the assessment of the size-weighted, fine fraction, and the crystallized silica.It is important to compare the technical requirements of the production standards with the specifications of standards in order to gain a greater understanding of the necessity for using these standards. You can seek out the help of experts in the area of international standards should you have any questions regarding the implementation of this stage. Check out the top sist catalog standards ksist-fpren-469-2020 site.

    Software Engineering Systems - Software Product Quality Requirements Evaluations (Square). Common Industry Formats (Cif) To Ensure Usability. User Requirements Specifications (Iso 25065.2019). EN ISO 25065:2020
    Software quality is today the most important factor in ensuring a position of leadership on international markets. Knowing the rules of these markets is possible by reference to the international requirements. These rules are contained in documents like EN ISO 25065: 2020.This document provides a framework and consistent language to define the user's requirements. It defines the standard industry format (CIF) which is used to specify user requirements. This includes the content elements as well as the manner of expressing the requirements.A specification of the user's specifications is the official document that outlines specifications of the user. This helps in the creation and evaluation of interactive systems.The definition of user requirements is (a) the requirements of user interaction with the system in order to get the desired results (including requirements on system outputs, attributes and their attributes); and; b) the specifications of quality related to use that specify the quality requirements that are associated with the results of users interfacing with the interactive systems and can be used to determine the acceptance of the system.ISO/IEC 25030 specifies quality requirements. These are the types of requirements that are quality-related. The content elements of the User Requirements Specification can be used as part of documentation resulting either from ISO 9241-210-related activities or human-centered design processes like ISO 9241-220.This document is intended for requirements engineers, product managers, product owner, and business analysts who are responsible for acquiring systems from third organizations. CIF Series of Standards addresses usability information (as specified by ISO 9241-11 & ISO/IEC TR 25606).Users may also require accessibility. This is in addition to the quality-oriented perspectives that are provided in ISO 9241-220.While this document was designed to be used in interactive systems, the instructions can be utilized in other fields. This document doesn't recommend any particular approach, lifecycle, or process. Iterative development involves the creation and development of requirements (e.g. as in agile development).
    The international standard can make your professional work much simpler. It will also aid to structure the existing system, and create new opportunities for expanding your reach in the marketplace and business growth. Check out the top cen catalog standards en-iso-7231-2010 blog.

    Health Informatics - Device Interoperability Part . 20701 Point-Of-Care Communications With Medical Devices - Service-Oriented Medical Device Exchange Architecture (Iso/Ieee 11073-20701:2020). EN ISO 11073-20701:2020
    The use of communication technologies is not just in the areas which are typically connected to this particular category, but also in the medical field. As the introduction of multiple medical devices can be complex and involves the restructuring existing systems, international documents are being created to aid these processes.
    The scope of this standard is a service-oriented device design and communication protocol specifications for distributed systems of Point-ofCare (PoC) medical devices and medical IT systems that require to exchange data or manage networked PoC medical devices. It identifies functional components, their communications relations, as well the connecting of these components and their communications relationships to protocol specifications.This document is particular and limited in scope. As such, we suggest that the document be reviewed for more information. If you have any questions, you can consult with managers who are specialists on international document choice. See the best cen catalog standards cen-tr-16234-4-2021 review.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links