Results 1 to 7 of 7

Thread: Titegroup for the 9MM

  1. #1
    Buff Canuck44's Avatar
    Join Date
    Feb 2006
    Location
    Terrace, B.C. Canada
    Posts
    106

    Default Titegroup for the 9MM

    Developing some loads for the 9MM usiing Titegroup. Tried 4.4 and 4.3 gr under 125 gr Lyman 356402. Loads are a little warmer than I need out of my CZ and Hi-Power. Anyone gone lower with good results?

    Take Care

    Bob

  2. #2
    Moderator Toney's Avatar
    Join Date
    Aug 2005
    Location
    Stillwater Oklahoma
    Posts
    585

    Default

    Hey Bob I've just tryed TG in my 9, it's not to bad. I'm shooting 4.8gr with 115gr bullets. They are a lot differnt than my power pistol loads!!!
    Toney Relic Hunter

  3. #3
    Moderator Toney's Avatar
    Join Date
    Aug 2005
    Location
    Stillwater Oklahoma
    Posts
    585

    Default

    Hey Bob I've just tryed TG in my 9, it's not to bad. I'm shooting 4.8gr with 115gr bullets. They are a lot differnt than my power pistol loads!!!
    Toney Relic Hunter

  4. #4
    Gunload Grunt kg42's Avatar
    Join Date
    Nov 2005
    Location
    BC
    Posts
    510

    Default

    3.5gr with LEE's 125RN, unsized and tumble lubed; that's much more barrel contact than the Lyman I think... works fine in a buddy's Commander and a medium Llama.
    The load is mild and accurate; I didn't go further with that powder.

    kg

  5. #5
    Buff Canuck44's Avatar
    Join Date
    Feb 2006
    Location
    Terrace, B.C. Canada
    Posts
    106

    Default

    Went down to 3.6 gr with Saeco 125 gr boolits and got an avg Dev of 9 and avg vel. of 1,099 fps out of my CZ 85. Like the load, just makes PF for IPSC but very clean burning. Will try it with my STI Trojan with 5" barrel. CZ extractor on the fritz.

    Take Care

  6. #6
    Gunload Grunt kg42's Avatar
    Join Date
    Nov 2005
    Location
    BC
    Posts
    510

    Default

    Wow, that's faster than I thought! Do you lubrisize or tumble lube? I wonder about the difference it would make...

    How fast did they go with 4.4gr?

    kg

  7. #7
    Buff Canuck44's Avatar
    Join Date
    Feb 2006
    Location
    Terrace, B.C. Canada
    Posts
    106

    Default

    I lube size, I would not think it would make much difference. Send me a PM and we can exchange emails. I can send you my Spreadsheet I use to record my chronoed loads.

    Take Care

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links