Will be using modern revolver and target loads for 115gr LSWC bullet. I want to use one of these powders-BE,WST,Ba10 and/or N310. Any one out there have any info?? Thanks Erod
Will be using modern revolver and target loads for 115gr LSWC bullet. I want to use one of these powders-BE,WST,Ba10 and/or N310. Any one out there have any info?? Thanks Erod
this is for the long cartridge
from the lyman cast bullet book,using a s&w model 31, 4" bbl
b.e-1.4= 525 fps 2.0=675 fps
red dot 1.6= 550 fps 2.5=775 fps
unique 2.1=550 fps 3.5=850 fps
630 4.0=600 fps 7.0 1050 fps
hs5 3.0= 675 fps 5.3=1102 fps
.312 is the nominal groove diameter but guns do vary and it's best to check your's and fit the boolit to them.
This is getting weird now. Every time I log on, there is a thread discussing what I'm thinking about. I guess I'll be loading these with a trickler, and some tweezers.
Jan. 4, 2007 gasoline $2.10 gal.....HMMM?
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |