Results 1 to 4 of 4

Thread: Need Load Data for 32 S&WL

  1. #1
    GunLoad Trainee
    Join Date
    Jun 2007
    Location
    Clinton,Tennessee
    Posts
    12

    Default Need Load Data for 32 S&WL

    Will be using modern revolver and target loads for 115gr LSWC bullet. I want to use one of these powders-BE,WST,Ba10 and/or N310. Any one out there have any info?? Thanks Erod

  2. #2
    runfiverun runfiverun's Avatar
    Join Date
    Dec 2007
    Location
    soda springs idaho
    Posts
    657

    Default

    this is for the long cartridge
    from the lyman cast bullet book,using a s&w model 31, 4" bbl
    b.e-1.4= 525 fps 2.0=675 fps
    red dot 1.6= 550 fps 2.5=775 fps
    unique 2.1=550 fps 3.5=850 fps
    630 4.0=600 fps 7.0 1050 fps
    hs5 3.0= 675 fps 5.3=1102 fps

    .312 is the nominal groove diameter but guns do vary and it's best to check your's and fit the boolit to them.

  3. #3
    GunLoad Trainee
    Join Date
    Jun 2008
    Location
    Middle GA
    Posts
    20

    Default

    This is getting weird now. Every time I log on, there is a thread discussing what I'm thinking about. I guess I'll be loading these with a trickler, and some tweezers.
    Jan. 4, 2007 gasoline $2.10 gal.....HMMM?

  4. #4

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links