Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Ransom Rest

  1. #1
    Rainwatcher Jammer Six's Avatar
    Join Date
    Oct 2006
    Location
    Seattle
    Posts
    35

    Default Ransom Rest

    Has anyone bought or used a Ransom Rest?

    I'm seriously considering buying one, and I'm curious about their use.

    Are they large? Heavy? Hard to set up? Hard to use?

    What benefit did you get from using one?
    "When I have your wounded."
    -Major Charles L. Kelly, callsign "Dustoff", refusing an order to leave a hot L.Z., July 1, 1964, moments before being killed by a single shot.

  2. #2
    GunLoad Trainee THEBIGMAC's Avatar
    Join Date
    May 2010
    Posts
    1

    Smile Ramson Rest

    Yes, I own and use one. Mine is mounted on a piece of 5/8" plywood, very steady.(that
    is the inportant part). When I go to the range I take 'c' clamps to clamp it tothe
    range bench . Keeping it steady is IMPORTANT!!! The inserts are caliber
    moulded and are very strong. When ever I use the Rest, I make sure I take the
    correct insert as I have a few. Use?? Working up a new load; sighting in a scoped
    handgun or a new gun to test factory sites. I do not have the windage unit. I tack
    a piece of paper table covering to the target frame, using the elevation knob, I
    shoot 6 rnds. near the top of it. Then lower the unit & shot 6 more, then lower
    some more, 'till I have no more room. I loosen the 'c' clamps, move the unit a
    little to one side of the target paper & shoot some more. Back home to my man
    cave, I hang the entire unit to the wall, using shelf hooks.
    I f you know other local shooters, perhaps they could assist you, (taking theirs
    to the range with you). Hope this information helps you. thebigmac from
    Cast Boolits Have a great day.....

  3. #3
    GunLoad Trainee
    Join Date
    Oct 2009
    Posts
    1

    Default

    I have a Ransome Rest with the windage base, with 7 grip inserts. I have mine mounted on an oak plank, and use C clamps to mount to the concrete shooting table at the range. There is a knack to shooting center fire auto's in this rest to get best grouping. I bought a new Clark Longslide 45 ACP, many years ago, and could not get it to shoot well from the rest. I called Clark and talked to one of their people, and was told their technique of using the rest, and using that info, immediately improved my groups. Revolvers are not so fussy. Any old way seems to work. One thing to keep in mind is, that if you have an auto with a loose fitting slide, it won't always go into battery the same spot each time, so your muzzle may be pointed in a different spot each shot. As the rest just holds the frame, and it is not practical to realign the sights for each shot, you are S.O.L. You can get better groups from a sandbag in these cases. The Ransome Rest is a neat toy, but under some circumstances it does require a level of operator skill to get consistent results. These skills can be learned.

  4. #4

    Default offtopic

    https://stankiprofil.ru/katalog/trub...ryamougolnyie/

    <a href="https://stankiprofil.ru/katalog/shpunt-larsena/">https://stankiprofil.ru/katalog/shpunt-larsena/</a>

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links