Does anybody in this forum shoot sass ? PS I am a new member will be seeking advise on re-loading black powder 44-40 boolets
Does anybody in this forum shoot sass ? PS I am a new member will be seeking advise on re-loading black powder 44-40 boolets
Last edited by wbrewski; 11-19-2011 at 11:08 AM.
black is pretty simple, a case full and seat the boolit on top with some compression.
NO air gap between the powder and the base of the boolit.
2f burns slower than 3f and 4f is used primarily for priming flintlock pans.
you need plenty of lube to keep the powder fouling soft.
lubes with b-wax and crisco or olive oil and lanolin work well but usually nothing hydrocarbon based.
and generally a softer boolit is best, something like 30-1 or 40-1 [lead to tin] or straight lead.
roll crimp gently to keep the boolits from moving forward under recoil.
use non static tools made from brass not plastic as a static zap will set black powder off.
you may want to use a 30" drop tube to get a full charge in a case.
those are the basics of a blackpowder round.
i am positive mike venturino has covered this sometime in the past in a handloader magazine also you could check their archives on the websight.
and over at the castboolits sight next door they have a black powder section where i am sure they can answer just about any question and probably suggest specific equipment and load components.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |