ISO Standardization As A Key For The Development Of Your Company
Part 1 - General Requirements For Security And Performance Of Medical Electrical Equipment. Collateral Standard: Usability En 60601-1-6:2010
The use and production of medical devices that are electrical is developing at the pace of new technologies. The production capacity is growing and these devices are getting more and more popular. EN 60601-1:2010 describes a process that allows manufacturers to analyse the design, define and specify usability. This is essential for safety fundamentals and crucial functionality in medical equipment. This usability engineering process assesses usability issues and assists in minimize the effects of them. We suggest you be informed of this standard when your company is involved to the production of medical equipment. See the best cen catalog standards cen-ts-13130-9-2005 blog.
International Standardizations Need Innovative Technologies
New technologies are revolutionizing the way we live. Every day each minute, and every second, new gadgets are being developed, new ways of utilizing technology are being discovered, and the world is constantly in change. Because of the significant influence of electronic machines and artificial intelligence on human life and the environment, keeping these devices in chaos could result in devastating consequences for humanity. It is vital to be aware that the Internet has made data transfer quicker and more secure. There are also greater risks of information being leaked. Security is becoming more urgent every day. Today, we'll offer technical guidance on where and how to make use of these tools and the international standards that are responsible for data safety. Check out the top cen catalog standards en-iso-2063-1-2019 blog.
Bulk Materials Characterization - Determination Of Size-Weighted Fine Particles And Crystalline Silica Content Part 3: Sedimentation Method EN 17289-3:2020
Many methods are employed in the process of production and make use of various materials. Each of these techniques needs some level of control depending on the type of nature of the activity. One of the documents that standardizes the specific application method for crystalline silica is EN 17289-3: 2020.This document explains the calculation of the size-weighted percentage (SWFF) and also as the fine portion of crystallized silicona (SWFFCS), from bulk materials. It uses the liquid sedimentation technique.This document was designed to allow users to evaluate bulk materials in relation to their finefraction weighted by size and silicon content.This document may be used to determine the bulk silica content of crystalline silica substances, provided it has been fully checked and verified to establish the weighted size of the finefraction as well as crystalline silica.The description of methods for production significantly simplifies the process of constructing an effective control system. If you're interested in entering new markets, we highly recommend that you consider buying international standards for your location. See the top sist catalog standards sist-en-iso-12813-2020 blog.
Safety - Woodworking Machinery - Part 10 - Saws Used For Construction Sites (Contractor Sees) (Iso 19085-10 :2018, With A Corrected Version For 2019-12). EN ISO 19085-10:2019/A11:2020
There are certain standards that include additional specific features. This is due to the fact that technologies change constantly, however the initial appearance does not change for specific standards. EN ISO 19085-10 / 2019 / 2020.2020-07-20 JF: In the decision C132/2020 taken on 2020-07-08 The CEN Technical Board approved the updated Annex ZA and therefore, the European Amendment, of EN ISO 19085-10:2019. European modification is currently in the process of publication.Contact the iTech team if you have any queries after reading this document. Have a look at the most popular cen catalog standards en-iso-24801-1-2014 blog.
Information Technology For Health- International Machine-Readable Coding Requirements For Medical Product Package Identifiers ISO/TS 16791:2014 NEW version ISO/TS 16791:2020
The number of regulations and guidelines that govern the use of these new technologies is increasing , as more and more are being made accessible. EN ISO11073-10201 is set for 2020. The document could be revised in response to technological advancements.This document provides guidelines for identification and labelling medicinal items beginning at the point that they are made to the moment at which they are dispensing. This document outlines the best practices in AIDC barcoding in the context of applications. Users should, however, consider the coding interoperability requirements for different AIDC technologies, e.g. Radio Frequency IdentificationIf you've previously worked with this guideline and are operating in the same field we suggest you purchase the latest version that has updated guidelines. Have a look at the best sist catalog standards sist-ets-300-128-a1-e1-2003 blog.
Reply With Quote
