Results 1 to 2 of 2

Thread: black 3" shotshell hull

  1. #1
    300winmag 300winmag's Avatar
    Join Date
    Sep 2010

    Default black 3" shotshell hull

    black 3" shotshell hull

    remington, remington headstamp,sportsman highspeed steel hull 1400-1 1/4-bb max 1050 bar 76mm.12ga 3in can it be reloaded with longshot powder, win209 primers, waa12f114 wads, 1 1/4 thru 1 5/8 loads #5 or #6 magnum lead shot, has plastic yellow base wad
    Last edited by 300winmag; 10-04-2010 at 04:01 PM. Reason: delete

  2. #2
    runfiverun runfiverun's Avatar
    Join Date
    Dec 2007
    soda springs idaho


    the best advice i can give here is to measure the internal volumn and compare it to known cases.
    remington has about 4 different case volumns out at any given time.
    in fact federal and win do the same thing.
    i found this out the hard way [like most everything else]
    but measure the internal volumn so you know where you are starting. then do the work-up like in metallic loading.
    it's worth the hassle, if the hulls are any good.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check Sponsored Links