Results 1 to 7 of 7

Thread: Pf9?

  1. #1
    Moderator Toney's Avatar
    Join Date
    Aug 2005
    Location
    Stillwater Oklahoma
    Posts
    585

    Default Pf9?

    Anybody got one? Having owned two P11 and a P32 i,ve really been wanting the pf9. Been reading a lot on the pistol, alot of it is BAD. Hard to belive after having such luck with the three i;ve owned, still got the 32 but Connie does'nt let me play with it very often.
    Toney Relic Hunter

  2. #2
    Gunload Grunt kg42's Avatar
    Join Date
    Nov 2005
    Location
    BC
    Posts
    510

    Default

    Interesting, It looks like they made a new gun rather than simply single stacking the old one... and had to go through teething problems...
    Can you see lots of differences with P11 parts?

    http://www.mouseguns.com/pf9rev/pf9rev.htm
    Last edited by kg42; 08-15-2010 at 09:59 PM.

  3. #3
    Moderator Toney's Avatar
    Join Date
    Aug 2005
    Location
    Stillwater Oklahoma
    Posts
    585

    Default

    I'm pretty sure i'll be getting one, almost got Connie talked into it
    Toney Relic Hunter

  4. #4
    Moderator Toney's Avatar
    Join Date
    Aug 2005
    Location
    Stillwater Oklahoma
    Posts
    585

    Default

    Getting one next week!!! My guy is getting me one for 275$ out the door.
    What should i get black, brown, or green?
    Toney Relic Hunter

  5. #5
    GunLoad Trainee
    Join Date
    Jan 2007
    Posts
    1

    Default

    Congrats, I have a PF9 two tone(Chromed barrel and slide) I like it-A 9x19 that I can actually pocket carry! One thing that I discovered in loading for mine is that it really has no leade to speak of. OAL with ball hasn't been an issue but loading TC hps (Hdy Xtp, Berry 124 grain plated etc and, to a lesser extent my preferred Rem 115 gr HP with radiused ogives ,seating somewhat deeper than normal is required. Of course deep seating is a pressure raiser in 9x19 so I start low and stay under handbook maximums.

  6. #6
    Moderator Toney's Avatar
    Join Date
    Aug 2005
    Location
    Stillwater Oklahoma
    Posts
    585

    Default

    Just got one today CDNN was out before i got the last one ordered.

    It screwed up on the first mag!!! Firing pin came out on the 6th round. The screw was loose by a turn and a half, got it locktighted in and shot 5 more mags. Had the mag drop 3 times. Guess i have to order another mag catch.

    Was pretty accurate, was have a little trouble shooting to the left untill i started pulling the trigger with the tip of my finger like i shoot the little 32 and 3at. But the trigger guard was wacking the crap out of my finger shooting it that way. Think i'll do better when i can shoot left handed agian.
    Toney Relic Hunter

  7. #7
    Moderator Toney's Avatar
    Join Date
    Aug 2005
    Location
    Stillwater Oklahoma
    Posts
    585

    Default

    Well i got a new mag catch and had the same problem with mags dropping. Took a file to the catch that was in the pistol and widened the lip about 25%. It's working now, fired 4 mags without probblems.
    Toney Relic Hunter

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links