Results 1 to 2 of 2

Thread: fouling and cleaning

  1. #1
    Grunt casullman's Avatar
    Join Date
    Feb 2009
    Location
    wisconsin
    Posts
    68

    Default fouling and cleaning

    In general I swab my barrels evry 20-30 cycles (with patches mostly an occational use of a NYLON brush) but, I recently read an article stating that a 22-250 was cycled 100+ times (with no loss of accuracy) before cleaning. IT was stated that after cleaning it took longer to foul the barrel "IN" again. I should mention jacketed stingers were used. does anybody else shoot extended intervals ?
    I have a plan

  2. #2
    Dogs Like Him versifier's Avatar
    Join Date
    Dec 2005
    Location
    New Hampshire
    Posts
    1,853

    Default

    I clean my rifles for four reasons.
    1. If I have been shooting jacketed bullets and want to run cast. Copper fouling kills cast accuracy.
    2. If the groups start to open up or the cycling is affected.
    3. If I am breaking in a new barrel.
    4. When I am putting them away for storage after the season ends.

    Some rifles shoot better clean, some don't. It really depends upon what you are shooting and how many rounds you are going through. As long as the accuracy doesn't deteriorate, the barrel isn't showing any signs of copper, lead, or powder fouling, and the action isn't building up any grunge, I don't bother cleaning most of them, except the semi autos. It is not unusual for me to put several thousand rounds through a rifle in the course of a year, especially if I am testing bullets. The only time I use nylon brushes is with copper solvents, bronze for everything else as it's so much faster and more effective. REALLY dirty bores (common with used guns, especially milsurps) sometimes require electronic cleaning alternating with specific solvents and brushing if different kinds of fouling are layered.
    "Stand your ground.
    Do not fire unless fired upon.
    But if they mean to have a war let it begin here."
    - Capt. Parker, Lexington Militia, April 19, 1775

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links