Results 1 to 6 of 6

Thread: imr 4350 vs h4350

  1. #1
    new-not brand new!
    Join Date
    Jan 2009
    Location
    nor-cal
    Posts
    6

    Default imr 4350 vs h4350

    Anyone know if h4350 can be substituded for imr 4350 using the same grain weight as suggested loads in speer-sierra and hornaday manuals??-I'm reloading 8mm-06 and find plenty of loads using imr 4350 but only have h4350 on hand-thanks for any help

  2. #2
    OLD GUN NUT nambu1's Avatar
    Join Date
    Dec 2008
    Location
    WV
    Posts
    15

    Default

    H4350 is slightly slower than IMR 4350. I could not find loads for 8mm-06 using either powder.

  3. #3
    new-not brand new!
    Join Date
    Jan 2009
    Location
    nor-cal
    Posts
    6

    Default

    thanks for the input-I'm going to ask hogdon's their thoughts
    cowboyt

  4. #4
    new-not brand new!
    Join Date
    Jan 2009
    Location
    nor-cal
    Posts
    6

    Default

    I just got off the phone with Mike of Hogdon's and he gave an ok to sub H4350 instead of IMR 4350- just start with the starting loads and work up, makes sense as H4350 is just a little slower that the IMR 4350

  5. #5
    Great Master
    Join Date
    May 2021
    Location
    USA
    Posts
    1,968

    Default Berguna Idn Poker Domain

    Menanggapi orang bertanya tentang situs poker idn deposit pulsa 10000, judi poker idn deposit pakai pulsa, poker face meaning, Saya sangat menyarankan ini luar biasa poker online url or situs idn poker bonus new member terbesar 2020, agen poker idn bonus new member terbesar, online poker best sites uk, agen idn poker, agen poker, dan juga ini luar biasa online poker link belum lagi ini online poker tournaments australia, kumpulan situs idn poker bonus new member terbesar, hukuman judi online malaysia, situs judi poker idn, idn poker 88 download, bersama semua ini hebat judi online toko which is also great. Also have a look at this keren online poker link dan juga ini play poker online real money uk, situs idn poker deposit 10 ribu, poker online with friends website, daftar situs idn poker online terpercaya 2019, online poker sites, dan juga ini peringkat tertinggi judi poker online toko dan juga ini agen poker domino qq, daftar judi online24jam terpercaya 2021, cara bermain judi online malaysia, poker online idn deposit via pulsa, online poker free with friends no money, dan juga ini peringkat tertinggi judi poker idn situs yang juga layak untuk dilihat. Saya juga merekomendasikan ini hebat poker online idn toko belum lagi ini pokerstars casino withdrawal time, agen poker terpercaya idn, idn poker terpercaya dan terbaik, idn poker download, judi online24jam deposit pulsa, di atas ini luar biasa poker idn domain bersama semua ini idn poker qq, agen idn poker deposit pulsa, judi poker pakai ovo, cara bermain judi online malaysia, login idn poker asia, belum lagi ini terbaik poker online toko yang juga hebat. Akhirnya, lihat ini luar biasa situs idn poker toko and situs poker idn terbaik, poker set b&m, online poker game app, untuk memastikan ekstra. Lihat lainnya Terbaik Judi Poker Online Blog de2c2e5

  6. #6
    Great Master
    Join Date
    May 2021
    Location
    USA
    Posts
    1,968

    Default ISO Standardization Is A Key To The Growth Of Your Business

    Part 1-2 Of The Medical Electrical Equipment - General Requirements For Essential Safety And Performance - Collateral Standard Electromagnetic Disturbances. Tests And Requirements En 60601-1-2:2015
    The definition of medical equipment demands greater precision and a deeper understanding of a specific area. Each medical system is governed by its requirements. The document addresses basic safety as well as the essential functions of Medical Equipment and ME systems in the event of electromagnetic disturbances. You will learn the requirements for safety of medical equipment usage in the first sections of the standard. Check out the best iso catalog standards iso-iec-dis-23093-3 site.

    Innovation Management - Innovation Management System - Guidance (Iso 56002:2019) En Iso 56002:2021
    A well-designed management system is essential in developing a profitable business today. That is why it is so important to keep an eye on the legal documents that govern it from the foundation to the final stage. One of these is the international standard EN ISO 56002: 2021.This document contains guidance to help you establish, implement, maintain and continuously improve your innovation management system. It can be utilized by any existing organization. It can be used to:A) companies that strive to be sustained successes by developing and demonstrating the capability to effectively manage innovations to get the results they want.B) Users, customers and other stakeholders who want to be confident in an organization's ability to innovate.C) groups and interested parties looking to improve communication via the common understanding of what constitutes an innovative management system;d) the providers of training, assessment of, or consultancy for, innovation management and innovation management systems;e. policymakers seeking to improve the efficiency and effectiveness of support programmes aimed at innovation capability and competitiveness of organisations and the development in society.1.2 The guidelines contained in this document are general and is designed to be used in conjunction with:a. Any type of organization regardless of size, sector, type or nature. The emphasis is on established companies but it is understood that temporary businesses as well as start-ups can also benefit by applying these guidelines in all or in part;B. All types and forms of innovation, e.g. All types of innovations that include product, service and process.C) All types of approaches, e.g. Both internal and external innovation, market, user, technology, and design-driven actions.It doesn't describe the activities within an organization however, it offers guidance on a general level. It doesn't prescribe specific tools or methods to encourage the development of innovation.If you find that certain sections of this document are misleading it's a good idea to consult a specialist. They can assist you to decide if the international standards are appropriate for implementation in your existing structure. Check out the recommended sist catalog standards sist-en-16064-2012 info.

    Characterization Of Bulk Material - Determination Of A Size Weighted Fine Fraction, Crystalline Silica And Crystalline Silicon Content - Part I General Information And The Choice Of Tests EN 17289-1:2020
    Variability in manufacturing materials creates a challenge for regulation both locally as well as globally. International standards have been developed to ease companies and organisations' entry into new markets. One of these standards is EN 17289-1:2020.This document provides information about the specifications and testing methods that can be employed to measure the size of the fine fraction of crystal silica (SWFFCS), in bulk materials.This document provides guidelines on how to prepare the sample and determine crystalline silica using X-ray powder difffractometry (XRD), Fourier Transform Infrared Spectroscopy, (FTIR).EN 17178-2 provides a method to calculate the size-weighted smaller fraction by measuring the size distribution of the particles. It assumes that the size distribution of the silicon crystals is similar to that of the bulk material. EN 17289-3 provides a method that makes use of liquid sedimentation to calculate the size-weighted fines in crystalline silica. Both methods have limits and assumptions. These limitations are outlined in EN 17289-2, EN 17289-3. The procedure in EN 17289-3 may also be used for other components other than CS when it is investigated and validated.This document is suitable for bulk silica-containing crystalline materials that have been thoroughly studied and verified for the evaluation of the size-weighted fraction and the crystalline silica.If your area of work comes into contact with the subject matter described in this document's description, it's inclusion in the documentation base for technology of your company will aid in expanding production. Visit our website to learn more. Have a look at the top cen catalog standards en-1367-8-2014 information.

    Software Engineering Systems - Software Product Quality Requirements Evaluations (Square). Common Industry Formats (Cif) To Ensure Usability. User Requirements Specifications (Iso 25065.2019). EN ISO 25065:2020
    The most important advantage a business has in a competitive market is the software's quality. It is crucial to understand the latest international standards in order to fully understand the market. These regulations can be found in documents like EN ISO 25065, 2020.This document provides an outline and a consistent language for defining user requirements. It defines the industry standard format (CIF) for a user requirement specification including the content elements as well as the format used to describe the requirements.A user specifications specification is the formal documentation the requirements of a user. This helps in the development and evaluation interactive systems.User requirements are defined as (a) the requirements of the user's interaction with the system to attain desired outcomes (including the requirements for outputs of the system, attributes and their attributes) and; b) the quality specifications for use that define the quality criteria that are associated with the results of users interfacing with the interactive systems . They can also be utilized to assess the system's acceptance.ISO/IEC 25030 introduces the concept of quality requirements. The use-related quality requirements in this document are a particular type of quality requirement. The content of a user specifications can be used in documents resulting from the activities in ISO 9241-210 or from human-centred design processes like those in ISO 92421-220.This document is intended to be utilized by requirements engineers, business analysts, product managers as well as product owners and individuals who acquire systems from third party. The CIF series of standards focuses on information on usability (as described in ISO 9241-11 as well as ISO/IEC TR 25060).Users might also need accessibility. In addition, there are quality perspectives that are provided in ISO 9241-220.This document was developed for interactive systems however the guidelines can be utilized in any field. This document doesn't recommend any specific method, lifecycle, process or methodology. The elements of a User Requirements Specification can be used in iterative Development, which is the elaboration of and development (e.g. as in agile development).
    The implementation of the international standard will dramatically facilitate your professional activity, as well as create a structure for your current system and open up new possibilities for capturing new markets and expanding your business. See the top rated iec catalog standards iec-62505-3-2-2020 information.

    Health Informatics -- Standard Communication Protocol - Computer-Aided Electrocardiography EN 1064:2020
    While it was only 10 years ago that medical technology was first introduced all over the globe, the situation has changed over the last few years. With increasing attention being paid to human bodies, innovations and development within the medical field is now focused on specific. Security of human lives is the main concern of the medical industry. Security of information is a major concern. EN 1064 is 2020 is an example of these international standards.The document outlines the most common standards that are needed for the cart/to-cart and cart/to-host exchange of patient-specific data. This includes information about the patient, their characteristics as well as recording information, ...), ECG signal information, ECG measurement results, and ECG interpretation. This document specifies the content and structure of the information that will be exchanged between electronic ECG carts and computer ECG management systems, and other systems on computers where ECG information can be stored.This standard will provide a major boost to the development of your company in the current market. We suggest that you read the details and click on the link to learn more. See the recommended iec catalog standards iec-62841-2-2-2014 information.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links