Results 1 to 6 of 6

Thread: 327 Magnum

  1. #1
    geekgunner mikeper's Avatar
    Join Date
    Jan 2008
    Location
    Charleston WV
    Posts
    1

    Default 327 Magnum

    I just purchased a Charter Arms .327 Magnum and fell over at the cost of the ammo per box. I have started looking for reloading dies and I know the .327 is a 32 on steroids and was considering Lee or RCBS 32 S&W long to reload cartages. I am open for suggestions on loading and etc.
    GeekGunner

  2. #2
    runfiverun runfiverun's Avatar
    Join Date
    Dec 2007
    Location
    soda springs idaho
    Posts
    657

    Default

    you should be able to get a set of 327's if not the h&r magnum dies will work for you.
    if you can find some cast boolits for your pistol and want a fun load that even grandma will find fun to shoot try a 98 or so grain boolit and 3.5 grs of 700-x or a similar speed powder.
    the s&w dies will be a bit short for your gun.

  3. #3
    OLD GUN NUT nambu1's Avatar
    Join Date
    Dec 2008
    Location
    WV
    Posts
    15

    Default

    The LEE website states that the 32 S&W long dies can be used to load the 327 Mag.,

  4. #4
    runfiverun runfiverun's Avatar
    Join Date
    Dec 2007
    Location
    soda springs idaho
    Posts
    657

    Default

    they must be using a ring in their sizing die and have plenty of room above it for longer cases.
    good to kow one set of dies will do the whole gamut of 32's
    nice

  5. #5
    Great Master
    Join Date
    May 2021
    Location
    Saas Company
    Posts
    2,213

    Default Luar Biasa Online Poker Halaman

    Untuk orang bertanya tentang judi bola online24jam terpercaya 2021, idn poker play 88, poker online free real money, Saya sangat menyarankan ini keren judi online situs or poker hands list, poker online real money australia, online poker tournaments real money, situs poker online idn terpercaya, online poker game with friends, dan jangan lupa ini lihat agen poker url bersama semua ini download aplikasi idn poker pc, pokerstars sign up bonus, idn poker play login, situs poker online indonesia terbaik, pokerstars uk, dan jangan lupa ini peringkat teratas poker toko which is also great. Also have a look at this lihat poker online forum di atas ini poker idn deposit pulsa 10rb tanpa potongan, poker online idn 369, judi poker online24jam deposit uang, aplikasi judi poker uang asli, poker set, bersama semua ini luar biasa online poker toko di atas ini online poker sites canada, idn poker 88 login, poker hands order, poker face lyrics lucki, agen idn poker deposit pulsa, di atas ini baru judi poker idn domain yang juga layak untuk dilihat. Saya juga menyarankan ini luar biasa online poker toko bersama semua ini judi online24jam deposit pulsa tanpa potongan, judi poker uang dollar asli, poker hands probability, online poker games for real money, poker face lyrics f word, dan jangan lupa ini baru situs idn poker situs bersama semua ini cara daftar poker online idnplay, idn poker login, poker hands order, poker online real money uk, agen poker domino qq, bersama semua ini peringkat tertinggi judi poker blog yang juga hebat. Akhirnya, lihat ini luar biasa situs idn poker url and poker online with friends pc, judi poker pkv deposit pakai pulsa, online poker with friends zoom, untuk memastikan ekstra. Lihat lainnya Membantu Judi Poker Blog 5e3567c

  6. #6
    Great Master
    Join Date
    May 2021
    Location
    Saas Company
    Posts
    2,213

    Default ISO Standardization Is Key To The Growth Of Businesses

    Part 2-8 Medical Electrical Equipment: Essential Requirements For The Safety Of Medical X-Ray Equipment In The 10kv-1 Mv Range. En 60601-2-8:2015
    There are many reasons why companies might not adhere to certain norms or documents. One reason is that the standards change every day. EN 60601-2-8.2015 that is a very important document that will affect the market for medical equipment, is one of the most important documents. It lays out the basic safety requirements and performance criteria for Xray therapy equipment. These devices are connected to supply mains that are alternating-current at nominal voltages of 10 kV to 1 MV. The requirements also include requirements for reproducibility and accuracy of performance in terms of radiation quality and the quantity of ionizing radiation that is produced. This must be taken into consideration in relation to safety aspects. The second edition of IEC 60601-2-8 cancels and replaces the first edition of IEC 60601-2-8. This edition is a technological revise that brings the standard into conformity with IEC 60601-1-3 and its collateral guidelines. We strongly recommend to follow the link on the website for your company if you operate in the area of the mentioned equipment. See the top rated cen catalog standards en-iso-1043-4-1999-a1-2016 information.

    International Standardizations Of Innovative Technologies
    New technologies are revolutionizing the the world. Every minute of every second is a brand new day. A new way to apply existing technologies is created each and every minute. The world is constantly changing because of this. Due to the profound impact of electronic machines and artificial intelligence on human lives, maintaining these devices in chaos could result in devastating effects for humanity. In addition, leaks of information are a growing issue with the rapid growth of methods for transferring information and the internet. Today we will provide instructions on how and how to make use of these technologies, as well as the international standards that are responsible for data safety. Check out the recommended cen catalog standards pren-1-rev information.

    Characterization Of Bulk Material - The Determination Of A Weighted Size Fine Fraction Or Crystalline Silica Contents - Part I: Basic Information, And Choice Of Test Method EN 17289-1:2020
    Regulators face significant challenges due to the varying nature of the materials used in production. To facilitate the entry of businesses and organizations to new markets, international standards are being created, one of which is EN 17289-1: 2020.This document details the requirements for the calculation of the size-weighted fine fraction (SWFF) and the size weighted fine fraction crystalline silica (SWFFCS).This document gives also guidance regarding how to prepare the sample and the determination of crystallized silica using the X-ray powder diffractometry (XRD) as well as Fourier Transform Infrared Spectroscopy (FT-IR).EN 17178-2 provides a method to calculate the size-weighted small fraction using a measured particle size distribution. It is based on the assumption that the size distribution of the silicon crystals is the same as that of the bulk material. EN 1789-3 describes a procedure that uses liquid sedimentation to identify the size-weighted fines in crystalline silica. Both methods have their limitations and assumptions that are detailed in EN 17289-2 as well as EN 17289-3. If tested and validated, the EN 17289-3 method can also be used for other components.This document is suitable to evaluate bulk crystalline silica materials, provided that it has been thoroughly researched and verified to permit the evaluation of size-weighted fine particles and crystallized silica.If your business is in contact with the materials mentioned in the description of this document, its inclusion in the technical documentation base of your company will greatly assist in scaling up production. For more details, you can go to our site. See the top rated iso catalog standards iso-16269-6-2014 info.

    Safety Of Machine Tools - Pneumatic Presses - Part 4. (Iso 160922-4.2019). EN ISO 16092-4:2020
    Safety issues are an essential element of establishing an appropriate regulatory framework for any company or production. This is the reason the reason why there are a variety of international standards that deal with the issue.This document, in the same vein as ISO 160922-1, defines the technical safety requirements and precautions to be taken by anyone who designs, produces or sell pneumatic presses that are designed to work with cold metal or other materials made up of cold.This document covers all the risks associated with pneumatic presses. They are intended to be used only under conditions that are reasonable foreseeable by the manufacturer. All the phases of the life of the machine as defined in ISO 12100:2010, 5.4, have been considered.You can inquire about the technical specifications and contact us if you are interested in purchasing this document. Check out the best iso catalog standards iso-tr-12350-2013 info.

    Health Informatics: Device Interoperability Part 20701 Point-Of Care Medical Device Communication - Service-Oriented Medical Exchange Architecture And Binding Protocol (Iso/Ieee 1107320701, 2020) EN ISO 11073-20701:2020
    This includes fields such as medicine, and communications technologies are utilized in these areas. As the introduction of multiple devices in medicine is complex and requires the restructuring of existing systems, international documents are created to aid these processes.
    This standard addresses a service-oriented medical device design and the specification of a communication protocol. It can be used to design a distributed system of PoC (Point-of-Care) medical devices, as well as medical IT systems that require data exchange and security-conscious control over PoC medical equipment. It defines the functional elements as well as their connections to each other.This document is particular and limited in scope. Therefore, we suggest that the document be reviewed for more information. If you have questions it is possible to talk with managers who specialize in international document selection. See the recommended cen catalog standards en-74-2-2008 info.


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links