To keep the dust down try using a dryier sheet,used or new.They catch a LOT of the dust and other stuff in the tubbler.Take one and cut it into 4 pieces.pan.
Printable View
To keep the dust down try using a dryier sheet,used or new.They catch a LOT of the dust and other stuff in the tubbler.Take one and cut it into 4 pieces.pan.
Inspecting your brass is easier and in my own little mind I think it is easier on my dies.
Plus it really really purdy when it is all shiney.
Ken.
Tumbled brass is pretty, no doubt. But the other reasons I tumble brass is I find it easier to see cracks on a clean piece, and they seem to slide through the sizing die a bit easier. I also believe it's a reflection on the quality of my work, and I take pride in most of the things I do.
Of course, non-tumbled ammo is just as functional and if I didn't have access to a tumbler I wouldn't lose any sleep over it.
GH1:-)
There is a used brass supplier online called first class bullets and brass, He preps the brass and cleans them before shipping, They look brand new inside and out! mirror finish. I wrote him to ask how he proccesses his brass, but got no reply. Has anyone know what this company does to their brass? I would sure like to know, Thanks john
jay
They probably have ceramic media in their tumblers.
I have yet to use it but everyone that has and talks about it gives it the big thumbs up as it cleans inside outside and primer pockets.
Ken
Walnut to clean and corncob to polish. that is all.
http://reloaders.gunloads.com/imageh...177436f6b2.jpg
Just a tsp in the media & wahla !
brasso has ammonia in it, bad for brass under pressure.
if you want to use somethig else you can use vinegar and some salt to make a weak acetic acid but you then have to rinse with a baking soda solution to neutralize.
if you want brass thats shinier than new, the stainless pins will do that for you.
i still use citric acid to clean the gunk out.
it's safe and good for the brass.
walnut to dry and get the sizing lube off, if i want bling i go with some nu-finish in the media.
dryer sheets do pick up the dust quite well.
but you need to keep the pieces large.