Printable View
Hello,
I picked up a box of 98 gr. cast WCs suitable for loading in .32 Long or .32 Magnum; I can't find any load data for this bullet for .32 Magnum. The powders I currently use are: Titegroup, W231, Universal Clays, WST, VVN340, and Lil' Gun.
Does anyone have any load data for a 98 grain full-wadcutter in .32 H&R Magnum?
kean57
I don't think I have any data but what I would do is look at data for the .32 S$W long and use about one gr, below the max and carefully work up.Quote:
Originally Posted by kean57
Hornady does have data for their swaged 90 gr. HBWC though and you should be able to use that as a start for your bullets.
W231 start: 2.5 gr./700 FPS Max 3.6 gr./900 FPS
Your other powders are not mentioned but the average start load for what is in the manual rns at 2.3 gr. for a start and about 3.4 gr. as max. Dunno if that's any help but it's all I have.
Paul B.
from the lyman 47th a 95 gr#313492 [mold number]
bullseye 2.5-3.7 825-1072 fps [your titegroup is in this burn rate]
231: 2.5-3.9 5' bbl 772 fps to 1071 fps
red dot 2.3 to 3.7 samish velocitis.
unique 3.0-4.4 same velocities. [universal clays is very close here]
aa#5 3.8-5.2 800-1125 fps
hero 3.5-4.8 same velocities.
sr-4756 3.2-4.6 725-1100 fps
sr-7625 3.0-4.4 800-1100 fps
best i can do.
you could modify jaxketed data if necessary.