View Full Version : shotgun reloads

bill myers
01-10-2007, 03:10 AM
hi ,i am new to this site and would like to exchange load data for all sorts of shot shell loads,i am looking for 12 ga 3" 2oz shotweight,all i can find in the various manuals is up to 1 7/8oz,but i have seen ads for shells for 2oz loads.all of my loads are from a printed sorce i.ie.hodgdon,accurate allient and others. i cast and shoot a lot of slugs,using the lee i oz slug mold.if anyone would like to exchange data or talk about thier fav,load i would like to hear from you.have any of you tried the ringed slug, it works very well,if interested email remwingmaster@peoplepc.com att.bill see you later

01-10-2007, 03:45 AM
Hi Bill,
Welcome to the forum. There isn't often much talk about shotshells, but I bet we'll hear from someone on this. If you go to the Gunloads home page (link at the top of this page) you will find a section where you can post your favorite loads and check out others.

01-10-2007, 05:42 PM
I only have 1 loading in my books for 2 oz.load its with activ plastic shells CCI 209 primer, rem. rp12 wad 35.0 grns aliant blue dot powder its 3 3/4 dram eq. and1,120fps.

01-10-2007, 06:02 PM
Hi Dave,
Glad to see you made it over here too. What kind of tooling do you use to load them on?

01-11-2007, 03:19 PM
I used a lee load-all for years,great little tool for the price,but I bought a hornady apex for, but haven't used it much been on the road to much,but hope that changes this year.