Mike in tx
04-07-2014, 01:48 AM
I have a 25-06 Stevens 200 that always chambered hard since new. Not hammer hard but seemed to be harder than I expected. After shooting it about 20 times it would not chamber the shell. I took it down and then returned the barrel to the receiver. Using the no go and go gauges it was 1/2 thread off. I now have it back together but have one question; I have the headspace set so that the no go gauge will not chamber just as I start the bolt down. Should I set the barrel forward so that the bolt goes down about 1/2 of the way or is it OK as it is.