View Full Version : WC 820 Fast powder
Ron in Pa
04-07-2006, 06:50 PM
Hi All, Can i use WC 820 Fast lot powder in a M1 Carbine with a 115 cast bullet.
454PB
04-16-2006, 05:00 AM
My lot of WC 820 is nearly identical to AAC #9 according to all my chronograph results in .454 Casull and .44 magnum. I don't own or load for an M1 carbine, but I've read that the slow burner (H-110 and WW 296) magnum pistol powders work well in that cartridge. Seems to me WC 820 will work fine, although it's considerably faster burning than H-110.
versifier
04-16-2006, 02:43 PM
AA-No.9 is listed under rifle loads, so it should be possible, but I cannot recommend a starting load of it. Someone on the CBboard may be more helpful.
I usually use 2400 in rifle loads and UNQ in handgun loads.
Ron in Pa
04-18-2006, 07:10 PM
Thanks 454 PB & Versifier for your reply.
TCLouis
04-30-2006, 11:28 PM
The true FAST lot is comparable to HS7, NOT AA#9.
Three (at least) distinctly DIFFERENT lots of WC-820 out there same for WC852.
David R
05-20-2006, 11:36 AM
Isn't WC820 pulled from a 30 carbine?
David
TCLouis
06-14-2006, 03:34 AM
The dangers of words!!!!
Fast lot WC 820was rejected for 30 Carbine use because it was TOO fast.
I hve some and have used it only in a limited test (NO chrono data) in 357 Mag in the Contender. Gave me accurate plinking loads and that was all that I was after!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.