PDA

View Full Version : Titegroup for the 9MM



Canuck44
03-21-2006, 05:51 PM
Developing some loads for the 9MM usiing Titegroup. Tried 4.4 and 4.3 gr under 125 gr Lyman 356402. Loads are a little warmer than I need out of my CZ and Hi-Power. Anyone gone lower with good results?

Take Care

Bob

Toney
03-21-2006, 07:08 PM
Hey Bob I've just tryed TG in my 9, it's not to bad. I'm shooting 4.8gr with 115gr bullets. They are a lot differnt than my power pistol loads!!!

Toney
03-21-2006, 07:09 PM
Hey Bob I've just tryed TG in my 9, it's not to bad. I'm shooting 4.8gr with 115gr bullets. They are a lot differnt than my power pistol loads!!!

kg42
03-21-2006, 08:32 PM
3.5gr with LEE's 125RN, unsized and tumble lubed; that's much more barrel contact than the Lyman I think... works fine in a buddy's Commander and a medium Llama.
The load is mild and accurate; I didn't go further with that powder.

kg

Canuck44
03-31-2006, 07:40 PM
Went down to 3.6 gr with Saeco 125 gr boolits and got an avg Dev of 9 and avg vel. of 1,099 fps out of my CZ 85. Like the load, just makes PF for IPSC but very clean burning. Will try it with my STI Trojan with 5" barrel. CZ extractor on the fritz.:neutral:

Take Care

kg42
04-07-2006, 12:25 AM
Wow, that's faster than I thought! Do you lubrisize or tumble lube? I wonder about the difference it would make...

How fast did they go with 4.4gr?

kg

Canuck44
04-07-2006, 02:51 AM
I lube size, I would not think it would make much difference. Send me a PM and we can exchange emails. I can send you my Spreadsheet I use to record my chronoed loads.

Take Care