.32 H&R magnum

[skimmerhead]

i recently purchased a .32 h&r mag revolver, iv'e never fired a .32 mag and have no knowledge on this caliber. i bought a lee 2 cav mold 95gr swc tl to try out till i can find a boolit design that i like then i'll get Tom at Accurate molds to cut me one. i noticed theres not alot of choices, and load data is skimpy. if anyone has any tips or info i would apprecieate it. thanks

skimmerhead

[runfiverun]

rcbs makes a nice 98gr rnfp mine pours out to a bit over 313 with ww and some tin alloy.
i use it in my 30 carbine revolver with 32-20 data.
3.5 grs of 700-x.
about as pleasant a load to shoot as i ever pulled the trigger on, but is close to 1k fps in my 7-1/2" bbl.

[skimmerhead]

rcbs makes a nice 98gr rnfp mine pours out to a bit over 313 with ww and some tin alloy.
i use it in my 30 carbine revolver with 32-20 data.
3.5 grs of 700-x.
about as pleasant a load to shoot as i ever pulled the trigger on, but is close to 1k fps in my 7-1/2" bbl.

thanks for the reply, i'll have a look at that mold.

skimmerhead :smile:

[slim400]

what load data books have you tride please list will see if i have any not listed .

slim400