Need Load Data for 32 S&WL

[ernierod]

Will be using modern revolver and target loads for 115gr LSWC bullet. I want to use one of these powders-BE,WST,Ba10 and/or N310. Any one out there have any info?? Thanks Erod

[runfiverun]

this is for the long cartridge
from the lyman cast bullet book,using a s&w model 31, 4" bbl
b.e-1.4= 525 fps 2.0=675 fps
red dot 1.6= 550 fps 2.5=775 fps
unique 2.1=550 fps 3.5=850 fps
630 4.0=600 fps 7.0 1050 fps
hs5 3.0= 675 fps 5.3=1102 fps

.312 is the nominal groove diameter but guns do vary and it's best to check your's and fit the boolit to them.

[jimkim]

This is getting weird now. Every time I log on, there is a thread discussing what I'm thinking about. I guess I'll be loading these with a trickler, and some tweezers.

[303tom]

http://data.hodgdon.com/cartridge_load.asp