Developing some loads for the 9MM usiing Titegroup. Tried 4.4 and 4.3 gr under 125 gr Lyman 356402. Loads are a little warmer than I need out of my CZ and Hi-Power. Anyone gone lower with good results?
Take Care
Bob
Developing some loads for the 9MM usiing Titegroup. Tried 4.4 and 4.3 gr under 125 gr Lyman 356402. Loads are a little warmer than I need out of my CZ and Hi-Power. Anyone gone lower with good results?
Take Care
Bob
Hey Bob I've just tryed TG in my 9, it's not to bad. I'm shooting 4.8gr with 115gr bullets. They are a lot differnt than my power pistol loads!!!
Toney Relic Hunter
Hey Bob I've just tryed TG in my 9, it's not to bad. I'm shooting 4.8gr with 115gr bullets. They are a lot differnt than my power pistol loads!!!
Toney Relic Hunter
3.5gr with LEE's 125RN, unsized and tumble lubed; that's much more barrel contact than the Lyman I think... works fine in a buddy's Commander and a medium Llama.
The load is mild and accurate; I didn't go further with that powder.
kg
Went down to 3.6 gr with Saeco 125 gr boolits and got an avg Dev of 9 and avg vel. of 1,099 fps out of my CZ 85. Like the load, just makes PF for IPSC but very clean burning. Will try it with my STI Trojan with 5" barrel. CZ extractor on the fritz.
Take Care
Wow, that's faster than I thought! Do you lubrisize or tumble lube? I wonder about the difference it would make...
How fast did they go with 4.4gr?
kg
I lube size, I would not think it would make much difference. Send me a PM and we can exchange emails. I can send you my Spreadsheet I use to record my chronoed loads.
Take Care
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |