Results 1 to 3 of 3

Thread: International Clays for 9mm and 45ACP?

  1. #1
    GunLoad Trainee
    Join Date
    Jun 2008
    Posts
    2

    Default International Clays for 9mm and 45ACP?

    I went to buy powder for my reloads (usually use Titegroup) but the store was out of it. The owner ISPC shooter with 20+ years of reloading experience told me I could us International Clays to reload both 9mm and 45 ACP.
    His recomended loads were:
    9mm- 124 gr. FMJ with 3.7 grains of Int. Clays 1056fps 32,000 CUP
    45ACP- 230 gr. FMJ with 4.0 grains of Int. Clays 732fps 17,000CUP

    Is this data correct?
    Will International Clays work fine in pistol cartridges?
    I woul appreciate any comments. Thanks in advanced.

  2. #2
    runfiverun runfiverun's Avatar
    Join Date
    Dec 2007
    Location
    soda springs idaho
    Posts
    657

    Default

    i would check this on the hodgdons website
    he may have meant universal clays, as there is more data for this.
    hodgdons has some limited international clays data available.

  3. #3
    GunLoad Trainee
    Join Date
    Jun 2008
    Posts
    2

    Default

    Thank you very much. I´ve already checked at Hodgdons web page and there is no data for International Clays for 9mm and 45acp.
    Thanks again

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links