Results 1 to 5 of 5

Thread: Is there any hope

  1. #1
    GunLoad Trainee DeanoBeanCounter's Avatar
    Join Date
    Jan 2007
    Location
    S. L. C., Utah, USA
    Posts
    27

    Question Is there any hope

    I've got this old model 83 Marlin in 30-30. It had too much head space so when I fired rounds the brass stretched out way too much. It is fixed now. But now this brass will not chamber right and when I reload I have to apply way to much pressure to size it. So now I have a lot of brass in the scrap bucket. I've shot brass from another source and it works just fine. Is there any hope for this stretched brass or is it just scrap now?
    Deano

  2. #2
    Gunload Grunt kg42's Avatar
    Join Date
    Nov 2005
    Location
    BC
    Posts
    510

    Default

    Have you checked the length of that brass?
    Do you have to apply excessive pressure every time you reload it?
    Can you see what is wrong when you chamber it (try to blacken cases with a marker and just load and unload a couple in a clean chamber)?
    How many is a lot in your corner of the woods ?

    I suspect nasty marks around the case mouth...

    kg
    Last edited by kg42; 09-17-2007 at 05:54 PM.

  3. #3
    Dogs Like Him versifier's Avatar
    Join Date
    Dec 2005
    Location
    New Hampshire
    Posts
    1,853

    Default

    Like they used to say in the kitchen, "When in doubt, throw it out." If it stretched out a lot, it was likely weakened, and it would be difficult to tell exactly where. .30-30 brass is easily had, so why take an unnecessary chance? Head separations are no fun.
    "Stand your ground.
    Do not fire unless fired upon.
    But if they mean to have a war let it begin here."
    - Capt. Parker, Lexington Militia, April 19, 1775

  4. #4

    Default Good Spot For Brass

    DEANO IHELPOUT at my gun clubs hunters sight in the club has it oncea year just before hunting season we charge per gun to just sight in unless things are slow thenwe let them pricticesmoe we ask them are you a reloader if thay say no and are not going to keep the brass you just put in YOUR the sight inseason runs for 5 weekends so you can see you caneasley fill a 5 gal bucklet or more . a lot of sharing gos on i have so much brass i have almost stop bring it home and 30-30 and 06 is most common also when i go to the range outher times thay are lots laying around just to be picked up mostly 223 308 06 12 gage

    P.S YOU MIGHT LOOK AT YOUR RANGE OR SHOOTING SPOT


    testhop
    Last edited by testhop; 09-18-2007 at 01:36 PM. Reason: GOOFED

  5. #5

    Default

    This Is Testhop Again
    Deano Remembr Bress Coust Less Than A New Gun

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links