Results 1 to 7 of 7

Thread: lyman mould bullet weight

  1. #1
    JJB
    Join Date
    Apr 2009
    Location
    IOWA
    Posts
    35

    Default lyman mould bullet weight

    i have an old lyman single cavity mould #357212 that i don't know what the bullet weight of the bullet it makes.... it's a round nose bullet that looks kinda heavy.... does anyone know of this mould and what weight of bullet it might cast? i went to lyman on my brain box here but i didn't find this mould listed.... i have another mould that i have used and it's a #358477 that casts a 150 gr swc bullet..... the 357477 mould was on the lyman page....... if anyone knows what weight this mould makes i'd be much abliged if you could tell me.... i friend of mine was wanting me to cast some bullets to reload 9mm by 19 with but this looks like a heavier bullet than a 9mm..... also i was wondering if a guy could size a .357 dia. bullet to .356 to load in 9mm.... THANKS FOR ANY HELP JJB

    LIFE IS SHORT.....

    the right of the people to keep and bear arms shall not be infringed.............

  2. #2
    Dogs Like Him versifier's Avatar
    Join Date
    Dec 2005
    Location
    New Hampshire
    Posts
    1,854

    Default

    #358212 is a 146gr RN plain base. Originally designed for 38spec I believe. I don't know when they stopped making it. No reason not to try it in the 9mm.

    Yes, you can size revolver bullets down to load in a 9mm, but you don't have to go all the way down to .356". If you do, you are asking for leading problems, especially with harder alloys. Depending on what the barrels slugs at, I usually use a .358" sizer for them with no problems. That's often too small for my .38spec & .357mag revolvers, which like them .359-.360". The optimum size for a cast bullet is .002-.003" over groove diameter. With a semi auto pistol, that generally means to go as large as you can (within reasonable limits) without causing function and feeding problems.
    "Stand your ground.
    Do not fire unless fired upon.
    But if they mean to have a war let it begin here."
    - Capt. Parker, Lexington Militia, April 19, 1775

  3. #3
    JJB
    Join Date
    Apr 2009
    Location
    IOWA
    Posts
    35

    Default

    ok now what is a good red dot or bullseye load for 9 mm in this weight bullet??

  4. #4
    Dogs Like Him versifier's Avatar
    Join Date
    Dec 2005
    Location
    New Hampshire
    Posts
    1,854

    Default

    I never tried anything that heavy in a 9mm, so start with what you have on hand and see if it groups acceptably.
    "Stand your ground.
    Do not fire unless fired upon.
    But if they mean to have a war let it begin here."
    - Capt. Parker, Lexington Militia, April 19, 1775

  5. #5
    Gunload Grunt kg42's Avatar
    Join Date
    Nov 2005
    Location
    BC
    Posts
    510

    Default

    This is what Alliant gave 10 years ago (reduce by 10% and work up):

    http://i191.photobucket.com/albums/z...96-9832-38.jpg

    Also you should check the actual weight of your castings with your specific alloy, as lyman have been known to vary a lot.

    kg

  6. #6
    runfiverun runfiverun's Avatar
    Join Date
    Dec 2007
    Location
    soda springs idaho
    Posts
    657

    Default

    your 9mm may like the 357 size just fine you might be surprised at how many 9mm barells are really 357 or 358 any ways.
    i shoot 358 sized 124 rnfps for the 38 instead of my 9mm mold quite frequently.

  7. #7
    JJB
    Join Date
    Apr 2009
    Location
    IOWA
    Posts
    35

    Default

    thanks again for the infomation guys....... this guy is kind of a newbie gun guy so i'll see what he has planned.... i'd like to get to range and pick up some brass.... for me and him................... lots of cops go out there and shoot and just leave their 9mms laying there.......................

    LIFE IS SHORT.....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Abbreviations used in Reloading

BP Bronze Point IMR Improved Military Rifle PTD Pointed
BR Bench Rest M Magnum RN Round Nose
BT Boat Tail PL Power-Lokt SP Soft Point
C Compressed Charge PR Primer SPCL Soft Point "Core-Lokt"
HP Hollow Point PSPCL Pointed Soft Point "Core Lokt" C.O.L. Cartridge Overall Length
PSP Pointed Soft Point Spz Spitzer Point SBT Spitzer Boat Tail
LRN Lead Round Nose LWC Lead Wad Cutter LSWC Lead Semi Wad Cutter
GC Gas Check        

Gunloads.com Sponsored Links