Thanks guys, i will try the paper clip, is there a case that might give a little more life? i have purchased some nosler brass but havent loaded any yet, and have been reloading remington brass. i...
Type: Posts; User: rjc
Thanks guys, i will try the paper clip, is there a case that might give a little more life? i have purchased some nosler brass but havent loaded any yet, and have been reloading remington brass. i...
Hello everyone, got a ? i recently purchased a savage 110 fcp-k in 300 win mag and have reloaded about 100 rounds of differant loads and bullets and run threw it, very good accuracy, but i have...
It took several shots around 4 if i remember right,i was around 15 but it was a wood pecker at about 250 yards with a iver johnson 22 carbine, best 22 i had ever owned, wore it smooth out i shot it...
Thanks for all the advice.
well , i bedded the action and the barrel down to the end of the chamber a couple weeks ago, and wow! it shoots alot better than i could ever have hoped for, im not bs'ing ,it shoots 3/8" on 2...
Between polishing the ramp a second time and emry clothing the expander die just a bit, it solved the problem ,tryed a differant mag but i think after those 2 things it was pretty much cured ,i havnt...
I am going to try the bedding the action first of all because there are points where it does not contact,including the recoil lug ,it has about 1/16 gap at the back of the reciever recoil lug and the...
the box is in the mag well is very tight in the stock on the sides,but it doesnt stick up higher than the stock, it is flush or just a hair shorter that the stock,if letting it cool doesnt fix it...
ok im kinda lost,do you mean stick a shim under the barrel at the very front of the reciever where the barrel will touch the stock,does it need to put pressure on the barrel? here is what i done...
I have been thinking of trying the 150 GK, they are very good in my 308,my gorups in the 7 mag are 3 at about 3/4" 2 almost in the same hole 3rd one opens that group of three up to about 3/4" 4th one...
somewhat worse, winchester,remington, and federal were well over an inch prob around 1 1/2"- 2" what about these berger bullets are they all that?i may try some. i have tried R-22,H4350 WITH 160...
I had run into a small problem with a long throat on a 308 H&R rifle, the problem was to get close to where it needed or i thought it needed to be the bullet was not seated very far into the case so...
I have tried a BUNCH of different loads for my 7 mag and the best i can get out of any of them is 1" groups, IT IS A WINCHESTER MODEL 70 LAREDO CLASSIC LR, IT HAS THE ALLUMINUM BLOCKS IN THE RECIVER...
No more problems with the 45,thanks guys for the help.
Thanks guys, i will try a good mag and see what happens.
wilson or kimber ,which ones are best?
thanks guys, another ? how far down from the case mouth should you be able to see the roll crimp?and just a update on the problem i am having, i emry clothed the shank a little on the expander plug...
I think im wrong about the expander because it has a bell molded into the shank A little ways up the shank,could this be the problem the shank is a bit big on the sizer plug?before it gets to the...
currently at the min load recomended for the bullet weights, it will bell with out expanding just touching the case with the plug and i mean barely touching. the bullet will just start in the case...
the brass is[ federal one fired] and remington new brass and some winchester once fired,same problem with all the brass,magazines ,2 are the tauras and one is a colt mag the colt mag seems better...
HELLO! I have run into a small problem with reloading 45 ACP i just bought a taurus pt 1911 i realy like it but when i started loading ammo for it i noticed it was starting to push the bullets into...
thanks,M700P
thanks everybody your input is helping me a lot, just to update i loaded some 165 gr ballistic tips in the 308 last week and went and burned a few saturday the coal was 3.035 and groups have went...
would it not cause a higher pressure to crimp a bullet without a crimp ring? new to this so im learning as i go.
Versifier, thanks for all the info.
BP | Bronze Point | IMR | Improved Military Rifle | PTD | Pointed |
BR | Bench Rest | M | Magnum | RN | Round Nose |
BT | Boat Tail | PL | Power-Lokt | SP | Soft Point |
C | Compressed Charge | PR | Primer | SPCL | Soft Point "Core-Lokt" |
HP | Hollow Point | PSPCL | Pointed Soft Point "Core Lokt" | C.O.L. | Cartridge Overall Length |
PSP | Pointed Soft Point | Spz | Spitzer Point | SBT | Spitzer Boat Tail |
LRN | Lead Round Nose | LWC | Lead Wad Cutter | LSWC | Lead Semi Wad Cutter |
GC | Gas Check |