Search:

I can't use CCI primers in my Ruger SP101 357Mag. I did a trigger job to lighten the trigger pull to 9lbs and if I use CCI' or Remington primers I'll get a Click-No-Bank. I use both CCI and...

I would be careful, I was watching a Glock 23 and my math just doesn't add up. Each bid raises the price 1 penny but you pay 70-90 cents per bid and have to get at least 500 bid so that is $45. The...

From what I’ve seen, LH guns sell quickly. I’m right handed but I noticed my son used his left hand early on. I then confirmed, to my dismay that he was left eye dominate. I began shopping for...

A couple of years ago, I had Mag-na-port put a break on my 7 Rem Mag to make it more comfortable to shoot. The first time I shot it it was 6 inches off to the right @ 100yds. I walked it back in...

I have a 742 that works great with 58gr of RL-17 with 150 SST. They were just as good in my Rem 700 but my son didn't like the recoil. Worked up lighter loads using RL-15 that worked good with...

Remember the Berry's have to be below 1200 fps. My Ruger SP-101 has a 2 1/4 in bbl and averaged 1090 fps with 14.9 gr of 2400 and a 125 gr XTP. My 158 gr and 12.5 of 2400 averaged 1015 fps. In my...

With a lite load and a loose grip your body, arms and hands can absorbe too much energy that is needed to cycle the gun. Did you work up your round to find what the gun likes?

The days of 2 cent 22LR are over! I did buy some cans of Federal at $20 for 325. They say thier Nitrogen packed, Weatherproof and Waterproof.

Thanks Versified,

The dies are RCBS Carbide and they were bought new 2004 to 2006. My original thinking for posting in the "Component" was Federal primers are softer. I had lighten the trigger on...

I just ran into a problem that I have never seen after having made some 25K to 35K reloads. I was running some Blazer and Federal 45 Auto brass with small pistol primers through my Hornady AP Press...

I have great success with Power Pistol, but I only use 6.8gr. In the Hornady 7th that is the max for 240gr jacketed is 6.8gr and 7.0gr for cast. A little less powder might help. As for crimping, I...

I am looking for some help understanding what I got. My dad has a Nickle plated revolver. It has the name American Double Action on the top strap and a serial #548 under the grips and has a round...

A Taurus 327 Mag with a 2in bbl. It bits a little with the 327's. The 32 H&R better. If I can use the Berrys 71gr on 32 S&W it will be cheaper than 9mm. And that is just right! I don't save...

The Berrys MFG Plated 71gr bullets are .312, which is the same size as the Hornady XTP for a 32 S&W, 32 H&R Mag and 327 Fed Mag. Speers lists the same 60gr GDHP for the 32 Auto and 32 S&W. The...

I have look in my book and online and can't find what I'm look for. I'm look for a load for a 32 S&W Long using a Berry MFG 71gr plated bullet. I can find 60gr and 85gr jacketed but not a 71gr. I...

Thanks for your feedback, I was curious why Taurus would end production in the 327 Fed Mag so quickly after starting. I own 5 Rugers, 3 of them are revolvers. I was hoping the Taurus would be...

I am looking for some loads for a 327 Fed Mag. I haven't been able to find anything in any book. Alliant has loads using 2400 and Power Pistol with 115gr Speer GDHP. I know it's only a 3-year-old...

Does anyone know why Taurus has discontinued making a 327 Mag? The round is only 3 years old and to make and discontinue that quickly raises questions. I talked to Taurus and they had no answers...

My goal for the Chrony is 2 fold, if the velocity is consistent from batch to batch, any problems in grouping is coming from behind the gun and not in front of the hammer. The other is I have not...

Guy’s

I need some help, I have only been reloading for 2 years and have been very happy with my results on paper down range and the deer in my freezer that I got with my hand loaded 357mag. But I...

I found 2400 works great for my 44mag and 357mag.

Then I use Power Pistol in 44Spec, 38Spec and autos from 380 to 45ACP.

Try different powders, but always use the right tool for the job. One...

I pick it up on my hands and knees. If you at an indoor range you can sweep it into a pile first.

Under my Dad's deck there are probably tens of thousand of spent brass. Just pick up what you...

Your very close on the price. If you are buying new brass, that can cost you, but when you reload the brass is when the price drops.

Steve

A guy on this site Versifier once told me, First off, one current manual is not enough to properly evaluate loads. Sometimes there are occasional mistakes in data entry, and even the best...

1lb of powder equals 7,000gr. so if you are using say 7gr of Power Pistol for a 38Spec, 1lb will load 1,000 rounds. If you are loading say a 300 Win Mag with 70gr you will only get 100 rounds.
...