PDA

View Full Version : H&R--NE



Toney
10-04-2005, 03:20 AM
Is the H&R guns better than the hew england ones. Bought a topper, [smilie=f: it has a solid reciver. My 270 ne hr had allum with steel over it. It loosened up fast

Bullshop Junior
01-29-2006, 10:44 PM
Is the H&R guns better than the hew england ones. Bought a topper, [smilie=f: it has a solid reciver. My 270 ne hr had allum with steel over it. It loosened up fast

Toney,
As far as I know the H&R And the NEF are the same gun, and that H&R bought out the NEF company awhile back. we have one of the old H&R model 15 in 30/30, and can almost equal the 308 with it. They are owned by Marlin now. http://www.marlinfirearms.com/HandRFirearms/default.aspx
DANIEL/BS JR.

versifier
01-29-2006, 11:28 PM
They are indeed the same gun, made in the same factory, by the same bunch of "assemblers". They make some very accurate barrels, but the mating surfaces of barrel and action are not properly heat treated and they loosen quickly with use. This is more pronounced with heavier recoiling chamberings, but a common fault with all of them. For a light duty spare, they might be OK, but they do not stand up to regular use very well. Their concept of an inexpensive switch barrel is a great idea, but they are not Contenders or Encores in quality and their triggers are absolutely horrible. Careful stoning can improve that a bit, but I like to shoot my guns a lot and two examples I have seen and shot just don't make the cut. Just my experiences with them, YMMV.
As I understand the situation there, they don't pay their workers well, and I am told that they encourage a fairly high turnover rate to keep their labor costs as low as possible. This does little to inspire quality work and drives out anyone with enough experience and knowledge to ensure quality. Two former employees have told me horror stories.

Toney
01-29-2006, 11:34 PM
My 270 loosened up after around 300 rounds and it always had issues with extraction. But i had seen the h&r rifles looked like they had better stocks and cost more.

Have been thinking about another in 357, 22 hornet, 223, a 45-70 would be nice to.

canon6
02-06-2006, 02:13 AM
Toney I have had both NEF and H&R in calibers from 223 to 45/70 and have never had any problem with them that was not operator error.They can be picky about the mmo or reloads that they like ,but if you do your part so will they Doug

robertbank
02-12-2006, 01:20 AM
Maybe a dumb question but my first shotgun was and is an H&R 12 gauge Topper. Are rifle barrels interchangeable with the old shotgun or am I hoping for to much? Should add I paid $15. for it in 1958.

Stay Safe

Bullshop Junior
02-12-2006, 05:56 AM
Maybe a dumb question but my first shotgun was and is an H&R 12 gauge Topper. Are rifle barrels interchangeable with the old shotgun or am I hoping for to much? Should add I paid $15. for it in 1958.

Stay Safe
Robertbank,
I think that you will need the newer rifle frame for the interchangable gun for the two reasons following.
For One I have an old, maybe 1980's pardner 12ga, that I asked about barrels, and they said that they would not do it on the shot guns, and for two, I have a 1980'S single shot 30/30, which they say is two old to change the barrels on. (If they didn't manufacture the barrel then they won't do barrels for it, Marlin just bought the company with in the past few years - Bull Shop Mom)
DANIEL/BS JR.

robertbank
02-12-2006, 04:13 PM
Thanks for the reply. Kind of suspected as much.

Stay Safe

versifier
02-12-2006, 06:31 PM
There's no reason you can't put an insert in it, is there?

Bullshop Junior
02-12-2006, 10:24 PM
I believe that they will only do the guns that were made when the two companys joined together. If you found a old barrel at a gun show, or some place I believe that the two will work on the one frame because, I got curious and took the barrel off of the shot gun, and the barrel off of the 30/30, put the barrel off the shot gun on the 30/30 wala a shot gun, and put the 30/30 barrel on the shot gun frame WALA, a 30/30. So there you go.
DANIEL/BS JR.

robertbank
02-13-2006, 02:11 AM
Hey that is good news. Kind of thought it should work. They unfortunately don't sell barrels without your receiver. Try Viola! I flunked French but we get French on the other side of the cereal box. LOL

Stay Safe

lovedogs
02-28-2006, 03:25 AM
Boy, I keep hearing so many varied opinions on these. Some hate them and some love them. Metallurgy is different on old vs. new and also on receivers built for modest vs. intense cartridges, or so I'm told. If used within their capabilities and at the right pressure levels I don't think they have a problem. As far as triggers, some are poor and some are great. A trigger job is easy on them. If you want a web site to show you how, let me know and I'll send it to you. I know about a half dozen people who shoot Handi-Rifles, Buffalo Classics, and the Target Model competitively and really like them. Of course, this is all with cast lead and low vel. target loads. One of the older ones, a Shikari, is REAL old and has a kajillion rds. through it and still doing fine. All of us here really like them. Maybe we're just lucky, huh? The latest ones bought were Classics & Target models. Their quality is right up there. Good bbls. and triggers, too. I wouldn't trade my .45-70 for a Sharps! It shoots groups right at 6 inches at our farthest target, 876 yds., with Saeco 500 gr. 1881 lead... that's with Shaver sights, not a scope. Show me another .45-70 in any brand that'll outdo that and I'll fight you for it! Far as I'm concerned they're economical but not cheap.

35Rem
11-18-2008, 04:09 AM
I bought a 223 NEF about 6 years ago. I do handload this cartridge and use it for coyote hunting. I have never had a problem with my NEF and it is deadly accurate.