PDA

View Full Version : Anybody hunting with cast bullets?



kg42
03-17-2006, 09:54 PM
What are your calibers, loads, alloys, accuracy and games? :)

kg

Toney
03-17-2006, 10:11 PM
Hey Kg I typed a good long thread the other night and lost it trying to post it.
I'm casting the Lee .314" 185gr RN for a lot of my rifles. Got a .308 sizing die for the 7.5s, have not shot any of the sized bullets yet. The little french rifle did reallg good with non sized bullets and the necks just sized with a factory crimp die.
The little Jap rifle with 06 cases reformed with 7.65ar dies and necked sized with the factory crimp die is giving my 30-30 accuracy shooting the 185s with 30gr of pulled 8mm powder. vol is around 1800fps. It's the rifle and load i got a doe with opening day this year!!
Most of my lead is from the range, my wheel weights did'nt last long!

kg42
03-18-2006, 01:09 AM
Hey Kg I typed a good long thread the other night and lost it trying to post it.

All is not lost... now we know your secret powder! http://reloaders.gunloads.com/images/smilies/icon_twisted.gif

Thanks Toney ;)
kg

d-o-k
03-18-2006, 06:25 AM
We disscused this on the question reguards the weatherby bullets .But I did'nt mention that The largest game I have taken with cast bullets was Water Buff with both 215gn cast out of the .303 & 405 gn cast out of the 45-70 both were always pure lina -type as it was freely avalible in those days! I've heard a lot said about the micro groving in the Marlins & cast bullets so far as accuracy goes yet I have never found mine to have any problems digesting the 405 gn cast or the 300 gn cast out of My Marlin

Dave

Bullshop Junior
03-19-2006, 05:19 AM
Remington 788 223.
PRIMER: Federal #200 SR
POWDER: 18.9gn of Hodgens 4895
BULLET: NEI 55gn spitzer gc ww @.225"
CASE:military range pick up.
LUBE: bull shop junior
FPS:2390
GAME: Rabbits, grouse, mice, squirrels.
Best cast bullet load that I have shot in the 223. I have one for the 35 remington too, but the other guys want the 'puter, so I will post it tomorrow.
DANIEL/BS JR.

Ranch Dog
03-19-2006, 03:09 PM
30-30 Win, 35 Rem, 356 Win, 375 Win, 44 Mag, 444 Marlin, 45-70 Govt, & 450 Marlin... all Marlin rifles. Marlin rifles and Micro-Groove barrels love cast bullets! Here are some of the critters I took in 2005...

http://home.awesomenet.net/~ranch-dog/Hunting/Thumb%20Nails/Nilgai%20Kill.jpg (http://home.awesomenet.net/~ranch-dog/Hunting/2005/0_004_263x350.jpg) http://home.awesomenet.net/~ranch-dog/Hunting/Thumb%20Nails/Michael%20444%20Goat.jpg (http://home.awesomenet.net/~ranch-dog/Hunting/2005/Michael444GoatB.jpg) http://home.awesomenet.net/~ranch-dog/Hunting/Thumb%20Nails/Yard Hog 004.jpg (http://home.awesomenet.net/~ranch-dog/Hunting/2005/Yard_Hog_003.jpg) http://home.awesomenet.net/~ranch-dog/Hunting/Thumb%20Nails/Hog111405%20005.jpg (http://home.awesomenet.net/~ranch-dog/Hunting/2005/33644_Hog_263x350.jpg)

Ranch Dog
03-19-2006, 03:10 PM
This site only allows four images per post so here are some more thumbnails...

http://home.awesomenet.net/~ranch-dog/Hunting/Thumb%20Nails/Deer111605%20002.jpg (http://home.awesomenet.net/~ranch-dog/Hunting/2005/Deer111605_002A.jpg) http://home.awesomenet.net/~ranch-dog/Hunting/Thumb%20Nails/Hog112405.jpg (http://home.awesomenet.net/~ranch-dog/Hunting/2005/Hog112405_003b.jpg) http://home.awesomenet.net/~ranch-dog/Hunting/Thumb%20Nails/LaRucia.jpg (http://home.awesomenet.net/~ranch-dog/Hunting/2005/LaRucia09B.jpg) http://home.awesomenet.net/~ranch-dog/Hunting/Thumb%20Nails/Mule Deer.jpg (http://home.awesomenet.net/~ranch-dog/Hunting/2005/Mule_Deer_2005B.jpg)

Dixie Slugs
08-08-2006, 09:56 PM
Wild Boar Hog Medicine ..........730"-730 gr hard cast heat treated solid base @ 1200'/"............730"-600 gr hard cast heat treated hollow base@1425'/"..........625"-500 gr hard cast heat treated solid base @ 1450'/"
Regards, James

d-o-k
08-09-2006, 03:01 AM
G'day & welcome to the guide Dixie ! May I say that's one good looking Hog ! Job well done


Dave

Baldy
08-09-2006, 04:44 AM
Hey Dixie welcome to the forum. Sure is nice looking hog you got there. Boys around here are big on hog hunting. We get a lot of fresh hog. Love that bacon. Man I am getting hungry.

Dixie Slugs
08-09-2006, 02:47 PM
We still have some rather big hogs in the Big Bend area of Florida that carry Spanish genes! The only hogs found on the hill are feral hogs. The big boys go well into the swamps and coastal islands. That is good as they take some specialized hunting. These big boars should be classed as dangerous game!
The guns we use are 12 gauge with rifled barrels, mainly semi-custom Remington 870 Express with Hastings barrels.
It should be understood that when you put a rifled barrel on a shotgun, you have an ultra bore rifle on a shotgun frame. The very basic knowledge you all have using hard cast bullets in handguns/rifles, still hold true loading the big 730"-730 grs cast bullets for the 12 bore rifles. Most of today's slug loads, Foster and sabot load are a compromise at best! First of all they are swaged lead and are too soft!
But, when you move up the heavy hard cast slugs, heat treated, you have re-introduced the basic Afican/India Paradox loads. Even the Lee Key Slug (one ounce only)cast hard and heat treated works good in both smoothbore and rifled guns. We have done a great deal of testing on the Lee Key Slug and found only one wad that would not strip when using hard cast......the Federal 12S3!!!!!! You do need about .200" hard card wad under the Lee, inside the wad, to set the crimp index. The 12S3 does not have ridges inside the petals and that is why it will not strip.
So......don't overlook loadind the big cast stuff!........Regards, James

lovedogs
01-15-2007, 06:10 PM
Hey, Lovedogs here. I've been shooting silly-wet competitions for about 3 years now using a .45-70. It uses 1881 style 500 gr. with 20:1 alloy, 23 1/2 gr. 5744 for 1150 FPS. Wonderful silhouette load that shoots great to a 876 yd. steel buffalo. I'd like to get a 300 to 350 gr. mould and use cast to hunt deer with. The 300 gr. jacketed I've used really flatten deer and antelope.

This fall I started using cast in my .44 pistols for deer hunting. My Saeco 240 gr. RNFPGC's at 1600 FPS out of the Super 14 Contender is a great deer slayer.

I've got a ways to go to be in Ranchdog's category but I'll try to remedy that if I can afford a few more rifles. I'm itching to try a good .30-30 (Marlin) some day.

Seabreeze133
05-02-2007, 07:10 PM
No longer hunt but a good load for 10" SBH is lyman 429244 sized appropriately for chamber mouth, 24 gr IMR 4227 WLP and Norma brass. WW brass is probably cheaper and more readily available currently. Might be able to bump the load w/WW cases but do so w/care.

Another good load, same gun, same everything else, is the Lyman 429215.

Never checked the velocity of the 429244 but the 429215 chronographed at 1550 fps from 10" barrel.

429215 is a good 100 yd load and the 429244 was great up to 200 meters in the old IHMSA days w/iron sights only. Actually nailed a nice muley at 155 yds w/the 429244.

Don

yeahbub
08-08-2007, 07:52 PM
Dixie Slugs, you touched on a subject I've been looking for the voice of experience to tell me about. I have a number of questions concerning traditional style slugs in rifled bores. Most of the people I've talked to are of the opinion that Forster (sp?) slugs don't give good results witha rifled barrel. It seems to me there are several factors which would cause this:
1. Being rifled, soft and hollow, they don't provide sufficient strength or contact surface for the rifling to grip and probably strip badly. It seems to me what's needed is a wheel-weight cast slug with thicker walls and smooth cylindrical sides.
2. No lubrication for all that bore length. Even my smoothbore barrel shows a silvery frost at the muzzle and it's not an even distribution. A way to address this using a handloaded slug is with lube grooves, a shot cup or paper-patch them with teflon-tape over the paper-patch. This has worked very well in a .375 Win.
3. Twist rate. The Paradox guns were only rifled for about 2 - 4 inches at the muzzle (like a rifled choke) and the 12-bore had a rate of 1 turn in 100 inches. Very gentle. Today's rifled slug barrels have a 1 in 34" rate which is three times faster, though necessary for the longer .44 and .45 bullets to be stabilized, thus commiting me to the use of $2-a-shot sabot slugs unless I can come up with a less expensive alternative which I thought the Lee arrangement might be, but had no one to ask.

How does my surmise compare with your experiences, and have you experimented with rifled chokes? What diameter are the Lee slugs when cast of a stout alloy?

Dixie Slugs
08-09-2007, 01:25 AM
You have an excellent grasp on the overall situation. The undersize soft Foster slugs have killed lots of thin-skin game over the years.....up close or as an accident at longer ranges. The were some funs made with undersize smoothbore barrels (abt.724") that shot fairly well. It would help if the factories would apply an Alox wash on the to at least help the leading problem.
You are also correct on the rifling tqiat on modern shotgun rifled barrels......to fast and designed for Sabot rounds. Added the fast twist to a very soft lead undersize slug and the results speak for itself. Ay least the Hastings barrel is .727" in the grooves and .717" on the lands......and super smooth!
You are also correct on the Paradox. Remember the slug/bullets designed for it were "squared" (length near the diameter) and shot well with a round ball twist. Also, they were made hard!
The Lee Kee Slug mold I have is not true round and runs .655"/.670" and weighs about an ounce with WW metal. These slug cast from WW, heat treated at 450 for an hour and water quenched) in the mentioned Federal 12S3 works pretty gun in both smoothbore and rifled barrels. In rifled barrels the velocity should be held aroud 1400'/" or less.
The hard cast heat treated full bore Dixie slugs do perform well in the fast twist guns.....I think a slower twist would be better though. The well known Dixie Terminator is .730" diameter & .735" long......weighs 730 grs. if you run that through Greenhill, you would see it also would be stabile at the old Paradoa twist when pushed 1200'/" to 1400'/".
So, where are we? In thinking of full bore solids in 12 bore (.730"), we find they react design-wise the same as the karge cast handgun rounds......just bigger!
As more shot-gun-only states allow muzzleloaders (Balck and smokeless) and Pistol Round Rifles......you will see a fall off of the sabot rounds ans expensive guns designed for them. Since those areas give Dixie no business, our business will remain as it is. I will say that there is a real increase in states other than shotgun-only for a handy shotgun with a rifled barrel, shooting full bore ammo, in dense cover. The Southern shotgun shooter is buying rifled barrels to put on their existing firearm.
Regards, James@Dixie Slugs

Dixie Slugs
08-17-2007, 11:13 PM
Hello Again Friends! That hog was killed by a friend across the river. Here in Florida we still have some Spanish and Russian genes in our wild hogs. The big boars a very shy about their sows and go ay back into the swamps. Most of what's killed in the hill country are smaller Ferals.
This looks like a good bunch of fellows! Maybe you will drop over to Dixie Slugs (dixieslugs.com) and say hello!
Regards, James

pdawg_shooter
11-20-2007, 09:58 PM
After five years of trying I have finally found THE load for my Marlin 1895g. Does everything I want done and is still shootable. I started with new Remington brass, annealed the first ¾ inch using the melted lead method, belled with a Lee expander and primed with CCI 200. The powder charge is 52gr AA 2495. I started with 48 and worked up with no signs of pressure. This is a compressed load, even using a 16 inch drop tube. The magic bullet is cast in a Lyman 451114 mould. The alloy is 17 parts pure lead, 2 ½ parts linotype, and ½ part tin. The bullet drops from the mould .451, 430gr and is ready for patching. I make my patches from 16lb green bar computer paper, cut 2.750 long on a 60* angle 1.500 high. I dip in water and wrap twice around the bullet. They are left to dry overnight, then lubed with BAC. Then the tails are clipped and the bullet is run through a .459 Lee sizing die. I seat them to an OCL of 2.580. These shoot clover leaf groups at 25 yards and into 1.75 at 100. This is with a Lyman 66 rear sight and factory front sight. Not bad for 55 year old eyes. Bullet performance on game is all one could ask for. I’ll not quit experimenting, but how does one improve on perfection?

GRW26
07-03-2008, 01:50 AM
I hunt with a SRH .44. I am casting a 310 LBT style bullet with WW (water dropped). I use 20gr of 296. This has proven to be the most accurate load for me (.5 to .75 at 25 yards). As far as hunting, dropped a black bear at 35 yards, bullet went through the front shoulder and came out the other side, the bear rolled over and never moved again.

missionary5155
07-11-2008, 03:30 PM
:-D[QUOTE=kg42;1806]What are your calibers, loads, alloys, accuracy and games? :

:-DYep sure do... Matter of fact I have never used a jacket bullet on anything
I cast my pills as soft as possible for the velocity and use a flat nose heavy bullet.
I hunt with 41 mag (my personal favorite) 375 Super Mag and 357 mag all Revolvers (Dan Wesson and one Blackhawk I am partial to)
Rifle.. 45-70 (hard to beat big holes) 375 Winchester and 38-55 ... once again as soft as possible and flatnosed. I also have a Krag that will soon be another river bottom rifle.
Deer (Flintlock)... groundhogs.. and any couger that I get a chance at that Illinois refuses to admit they released 10 years ago.